Question about Kenmore Washing Machines
Water leaks on filling
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Open the back of the washer. Start the fill cycle and observe where the water is leaking from. You are not going to get a full view of the entire tub by only opening the lower front access.
Posted on Feb 23, 2009
tip the unit back and lean against the wall so you can look under it you will see the pump it is plastic. more than likley this is your problem. let me know if you need more assistance
Posted on Mar 26, 2009
We had a similar problem with water coming out of the soap dispenser when the washer was run. I assumed that it was a problem with the water draining as everyone else posted here. I took off the front panel, got rid of the junk and drained it. Although this was great, it did not solve the original problem. It turns out that there was a sock stuck in between where the water comes out of the soap dispenser and in to the main compartment. Pulled it out with a needle nose plier and good to go. Thanks to everyone for their input here.
Posted on Jun 01, 2010
Testimonial: "good to go "
Tips for a great answer:
Aug 05, 2015 | Whirlpool Washing Machines
Dec 29, 2014 | Kenmore Washing Machines
Oct 10, 2014 | Kenmore series 80 Washer Motor 3363737-
Nov 04, 2012 | Kenmore 43142 Front Load Washer
Jun 07, 2017 | Kenmore Refrigerators
Aug 11, 2010 | Kenmore 15864/15862 Top Load Washer
Jan 25, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Dec 20, 2009 | Kenmore Washing Machines
Mar 29, 2008 | Kenmore 24032\24036 Top Load Washer
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: