Winterhalter error codes

Question edited for a lot more clarity.

There are no error codes listed for that model. On the GS 500 error 8 is Tank Heater

Tank heating (A1) defective - safety fuse has triggered - not properly connected

https://www.google.com/search?q=Winterhalter+PT500+error+codes

Contact Winterhalter Support

Manual


https://www.manualslib.com/manual/1375599/Winterhalter-Pt-500.html?page=17

..

Err 12 Connecting cable between operating panel and control is loose.

http://cearcommercial.co.uk/uploads/winterhalter-wps-reminder-error-management.pdf

https://www.google.com/search?q=winterhalter+gs+640+error+codes

..

This should solve your problem:
https://www.manualslib.com/manual/1337459/Winterhalter-Pt-M.html

Klix-on on motor has failed. (This is often due to overheat) Clear dust and dirt from around motor to restore cooling may be the answer. .

www.cearcommercial.co.uk/.../winterhalter/winterhalter-wps-reminder-er...

Eror 40

haw can i chainge a float switch on a winterhalter gs302 ?
please any one can hellp

No Water coming in to dishwasher no power going to solenoid no water in buster thank but elements are still coming on and buster pump is running all the time

error 6 relates to a blocked drain pump. if the drain pump is working ok check if the tank level sensor is operating or if the air chamber in the wash tank is blocked.
error 21 relates to the drain pump being activated. normally related to error 6.
also check water inlet solenoid valve is working correctly. ie not blocked or passing.
all parts of the machine can be activated manually by entering service mode.
when machine is off press service button or switch on main pcb.
p00 appears. press and hold main wash button. --- appears. using the long and short wash buttons you can scroll through parts of the machine. displayed as a01 a02 a03 etc.drain pump is a12 solenoid valve is a13. these are activated by pressing the button. when activating the drain pump the display will count down. this number is the water level in the wash tank. if it's counting down the level sensor is ok.
hope this helps
jarv

try to refer this problem to your manufacturer/ store owner of your laptop because most probably its either your memory(RAM) or your video card needs to be reset.it may have loose their connections.

because in the desktop PC's, these are the common problems especially upon booting up your computer.