Question about Bunn Coffee Makers & Espresso Machines
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It could be one of two problems, one simple, one serious.
Repiping is a job for a professional. Another symptom you may need a repipe is orange colored or rusty water.
Posted on Dec 05, 2008
Many states building codes require a pressure regulator and expansion tank for hot water heater installation. Check the pressure regulator if you have one as this would only affect the hot water pressure. Adjust or replace. Rap the expansion tank like knocking hard on a door. Hollow sound is good. Dull thud means it needs to be replaced as it is filled with water.
Posted on Jun 24, 2009
SOURCE: no hot water, and low pressure
Do you get hot water at other faucets? If not, check to see if the valves at your hot water heater are completely open. You may also have a blockage somewhere in the hot water line.
If you aren't getting hot water at just one faucet, it's likely that the hot water side of the valve needs to be repaired. It could be that there is a blockage in the valve that needs to be cleaned out, or seals in the valve may need to be replaced. Rebuild kits are available for many shower faucets at your local hardware store.
Be sure to turn off the water supply before attempting to disassemble the shower valve.
Posted on Sep 13, 2009
SOURCE: Low hot water pressure on
I think you are on the right track. The first thing I would do is change the cartridge. While you have the valve apart examine the inlet ports as good as you can to see if there is any mineral buildup. You can use a short length of a small gauge mallable wire to run into water ports to se if you can break anything loose. Another thing you can do is to turn supply stop on slightly while you have the valve disassembled to wash any particles out. Hope this helps you and thanks.
Posted on May 14, 2011
Tips for a great answer:
May 05, 2014 | Water Heaters
Jan 08, 2014 | Home
Apr 21, 2013 | Water Heaters
Feb 12, 2013 | American Standard E50H26 50 Gallon...
Jan 05, 2013 | Water Heaters
Dec 30, 2012 | Water Heaters
Feb 05, 2011 | Water Heaters
Aug 21, 2009 | Water Heaters
Jun 26, 2008 | Dishwashers
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: