Question about Dometic Heating & Cooling
GETTING AN E7 ERROR ON A NEW DOMETIC ROOF A/C. BLOWING SHOP BREAKER
Posted by Anonymous on
When you trip breaker it will give e7 code. something pulling to many amps. heat and ac running at same time.
Posted on Aug 18, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: dometic roof air
Sounds like the unit either has been miswired from the beginning or there is a stuck contactor relay.
The more rare scenario is that the control wire between the t-stat and the contactor is shorting to a power source causing the relay to energize. Good Luck!
Posted on Jun 23, 2008
SOURCE: I have a dometic dou
The thermostat needs to be reset. Turn it off and hold the top and bottom buttons in at the same time and turn the thermostat on. In a few seconds will read FF and you should be good to go.
Posted on Mar 19, 2009
I just replaced my two 620315.321 shrouds with the newer style without any problems. I went to the Camping World site (and called them) with model no. and they knew what to send me. I also found that they had the best price at $79.00 (member price) with free shipping.
I didnt check your shroud part no.s, but think you will be ok if you do as I did.
If you have any question about installing, you can email me at email@example.com
Posted on May 05, 2009
SOURCE: Ac Problems
You must have too many things running on that circuit. Check your connection to the power box.Loose connection on the receptacle can cause the breaker to trip or too many things running on the same circuit. If the breaker is old it might need to be replaced.
Posted on May 10, 2009
when the coils are dirty there is not a good heat transfer and there is little condensation of the refrigerant gas, the pressure in the condenser coil builds up too high and the compressor takes more amps, having the risk of geting burnt. Either the protector inside the compressor stops the compressor or the braker at the generator electrical wiring.
You have to make sure the coils are perfectly clean and try your ac checking the amps it takes when it is running, with dirty coils and with clean coils. and check the rated amps of the compressor at full load FLA
Posted on Jul 22, 2009
Tips for a great answer:
Dec 02, 2015 | Heating & Cooling
Aug 21, 2014 | Dometic Rooftop RV Air Conditioner
Jul 26, 2014 | Dometic Rooftop RV Air Conditioner
Mar 12, 2011 | Dometic Rooftop RV Air Conditioner
Jun 25, 2010 | Dometic Rooftop RV Air Conditioner
May 10, 2009 | Dometic Rooftop RV Air Conditioner
Jun 23, 2008 | Dometic Rooftop RV Air Conditioner
Mar 24, 2008 | Dometic Rooftop RV Air Conditioner
Aug 05, 2017 | Dometic Heating & Cooling
328 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: