Question about Tyan S2663 Xw8000 System Board Pn: 304123-001

1 Answer

Tyan s2663 Motherboard for HP XW8000 - Can it be changed over from SCSI to SATA?

I bought a used HP XW8000 and it has SCSI connectors and I didn't know if this particular motherboard for the HP XW8000 has SATA connectors also or if there is an adapter/connector that can be used to switch the drives to SATA. Thank you very much!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Tyan Master
  • 2,226 Answers

On ebay you can get

Posted on May 24, 2014

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: layout of the motherboard

i want laptop chip level component layout like acer ,toshiba, dell etc.

Posted on Mar 03, 2009

  • 70 Answers

SOURCE: need a schematic for this motherboard tyan tiger 133 (1834)

I found the information that you are looking for and you will find it here: http://www.tyan.com/archive/products/html/tiger133.html. This page on Tyan's Web site will provide you with a color image of the mother board (with slots labeled) along with the specs for the board. I hope this is exactly what you need.

Thanks for using Fixya and please rate my solution.

IT_GURL :)

Posted on Mar 28, 2009

  • 515 Answers

SOURCE: I have a pentium 4pc, the tyan s2090 motherboard

It looks like this one has the same memory slots and PGA478 CPU packet. Intel D845HVL Desktop Board

http://computers.pricegrabber.com/motherboards/Intel-845-P4-PGA478-PC133-SDRAM-uATX/m464848.html

Be sure to contact the seller about the ZIF of processor though.

If you want the same thing of your original, you may this one:
http://www.codemicro.com/store/product/S2090Trinityi845/Refurbished

Posted on Jul 22, 2010

  • 110 Answers

SOURCE: need to replace tyan motherboard s2090, could

It appears that any Pentium 4, ATX formfactor motherboard will do you. This ought to get you started, but make sure it will fit inside your computer. Don't skimp on the research.

Posted on Jul 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Xw8000 add in card


You are a bunch of jackasses!! No help at all with my problem!

I am outa here!!

Feb 11, 2014 | HP Workstation Xw8000 PC Desktop

1 Answer

How to Replace the DVD RW on my PC /HP Pavillion a6130n /


Better

There is Me

HP Support > Pavilion a6130n Desktop PC > Main Support page,

http://h10025.www1.hp.com/ewfrf/wc/product?product=3436817&lc=en&cc=us&dlc=en&lang=en&cc=us

How to > Adding / Replacing hardware > Opening the PC Case,

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00968217&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=3436817

Back page; Adding / Replacing hardware > Removing the Front Cover,

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00968624&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=3436817

Back page; Adding / Replacing hardware > Adding or Replacing a CD or DVD Drive,

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00981303&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=3436817

This is an example of a SATA data cable,

http://en.wikipedia.org/wiki/File:SATA_ports.jpg

Note the L-shape inside the cable's connector.

It also shows a SATA connector for the motherboard.
Note the L-shape on the connector. The optical drive (CD/DVD drive) also has this L-shape on it's connector.

(SATA connectors on the motherboard come in various colors. Color signifies what SATA connector it may be. SATA0, or SATA1, or SATA2, etc.)

Between a SATA data cable's connector, and a SATA power cable's connector, the SATA power cable connector is the larger of the two.

SATA data cable connector has 7-pins. (Contact pins)
SATA power cable has 15-pins. (Contact pins)

Example of a SATA power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#sata

A SATA data cable connector, and a SATA power cable connector, may have a small 'bump' on them, that you depress with your thumb, when installing the cable, or removing. The 'bump' is a Lock.

Usually the cable end going to a harddrive, or an optical drive; will be a 90 degree Elbow.
The straight end connector plugs into the motherboard.

A Top View look at the motherboard in your computer,

HP Support main page > Product information > Product specifications > Motherboard specifications, MCP61PM-HM (Nettle2),

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01077676&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=3436817

View shown has NO hardware on the motherboard.
(Processor, Ram Memory, etc)

The long Blue, and Black slots, with the White Lock 'ears', are Ram Memory slots.

The SATA connectors on the motherboard, are to the bottom/right corner, of the Number 3 and Number 4 ram memory slots. (Blue)

Yellow, Blue, White, and Black.

Scroll down, and click on the + sign to the left of the blue -
Motherboard layout

Using this illustration you can see;

Yellow SATA connector is SATA4 <-
Blue SATA connector is SATA3
White SATA connector is SATA2
Black SATA connector is SATA1

Due to standards set by JEDEC, and generally followed by all; the harddrive is plugged into SATA1.

HOWEVER, you can plug your optical drive, or drives, or harddrive, or harddrives; into ANY SATA connector on the motherboard that you want to.

The beauty of SATA is that BIOS will find the drive, NO matter what SATA connector on the motherboard you plug into.
Harddrive, or optical drive.

For clarification on anything I have stated above, or for additional questions; please post in a Comment.

Regards,
joecoolvette

Nov 05, 2012 | HP Computers & Internet

1 Answer

Dell t3400 power for 2 hard drives


Not a problem.

This is a general view of a SATA -> data cable, and it's respective connector on the motherboard,

http://en.wikipedia.org/wiki/File:SATA_ports.jpg

Note the L-shaped opening in the SATA data cable's connector, and matching L-shape on the SATA data connector on the motherboard.

Note also that a SATA data cable's connector has 7-pins
Between it, and a SATA power cable connector, the SATA data cable connector is the smaller of the two.

A SATA power cable has 15-pins,

http://www.playtool.com/pages/psuconnectors/connectors.html#sata

Note that it's cable connector opening is also L-shaped.
So is the matching connector on a SATA harddrive, or SATA optical drive. (CD/DVD drive)

A SATA power cable's connector generally has an area on it, that you depress with your thumbnail, and this releases a Lock.
Depress to install, depress to remove.

SATA data cable connector, Or SATA power cable connector; that goes to a Harddrive, or to an Optical Drive, is usually a 90 degree bent elbow.

The straight connector on the cable plugs into the motherboard.
(Can be straight connector on both ends through, but isn't CORRECT)

SATA connectors on motherboard;
IF, this Ebay link selling a Dell Precision T3400 Desktop PC motherboard, is correct, there are;

http://www.ebay.com/itm/Dell-TP412-Precision-Workstation-T3400-Socket-775-Motherboard-/360503300257?pt=Motherboards&hash=item53efabd0a1

1) FOUR Black SATA connectors
2) ONE White SATA connector
3) One Blue SATA connector

1 Black SATA connector, and 1 Blue SATA connector, at the bottom of the black Ram Memory slots.

1 White SATA connector, and 3 Black SATA connectors, right next to the where 24-pin ATX main power cable, plugs into the motherboard.

General example of said main power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

(Note* Color of connectors does Not matter )

Originally the Master harddrive, should plug into SATA1 connector on the motherboard.

If you look real close, next to all of those SATA connectors on the motherboard, you may see SATA0, SATA1, SATA2, SATA3, SATA4, and SATA5, printed right next to them on the motherboard.

The beauty of SATA:

DOESN'T MATTER WHERE YOU PLUG IN WHAT, on those SATA connectors.
Use ANY one you wish, and plug whatever SATA device into it, that you wish.

BIOS will find the SATA device.
No matter what SATA connector you plug into, and no matter what SATA device.

Kapish?

http://support.dell.com/support/edocs/systems/wst3400/en/ug/ug_en.pdf

What a minute, this news just came in.............

The Blue SATA connector on the motherboard, under the black Ram Memory slots, is SATA0.
The Black SATA connector next to it is SATA1.

If you have SAS harddrives (Serial Attached SCSI), the power cable's connector has a provision, to plug the SATA data cable into it also.
If you do not have that particular SAS power cable it's OK.

You can just use a separate SATA power cable, (90 degree elbow to harddrive/optical drive), and a separate SATA data cable.

For additional questions, or to have me clarify further on anything I have stated above, post in a Comment.

Regards,
joecoolvette

Oct 30, 2012 | Dell Computers & Internet

1 Answer

SMPS CONNECTION DIAGRAM


Not a problem, but it would be handier to have the manufacturer Name, and Model Number.

(Back of computer on a sticker, next to the Windows product key, or up on the side of the computer tower )


SMPS = Switched-Mode Power Supply. The style used in personal computers now,

http://en.wikipedia.org/wiki/Switched-mode_power_supply

A) Main power cable:
There are three styles;

1) The old AT style that has two separate connectors. The connectors BOTH connectors have BLACK wires towards one side.

The connectors also have ONLY one way, (Direction), they can be plugged onto the motherboard.
This is due to the Lock, and Locating Tab on the motherboard connector/s, and the main power cables connector/s.

When you can plug the connectors on the motherboard, with both connector's BLACK wires facing each other, (They will be in the middle), you have them installed correctly,

http://www.playtool.com/pages/psuconnectors/connectors.html#oldpc

2) The newer ATX style. Uses one power cable, and connector.
First style to come out was the 20-pin ATX main power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain20

20-pin ATX main power cable's connector, has a LOCK on one side.
This Lock locks over a Locating Tab, on the female motherboard connector.

To remove this power cable you squeeze in on the Top of the Lock.
The Lock operates like a see-saw on a playground. When you squeeze the top in, you remove it's hooked end away, from the Locating Tab of the motherboard connector.

To be ensured that this cable is plugged in tightly, and correctly, the Lock's hooked end will be over the Locating Tab, on the motherboard connector.

3) The newest style is the 24-pin ATX main power cable.
As computer hardware evolved, and became better, it demanded more power.
The extra 4 pins of the 24-pin ATX main power cable provided this,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

[ Aftermarket power supply manufacturers, provide power supply's with a 20 + 4-pin ATX main power cable, usually.
You can use it as a 20-pin ATX main power cable, or use the additional 4 pin cable, and use it as a 24-pin ATX main power cable ]

4) Motherboard didn't provide enough power for newer Processors.
The 4-pin ATX +12 Volt power cable was brought out.
(Has Lock with Locating Tab on the motherboard connector, also)

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

5) Motherboard didn't provide enough power for high-end graphics card.
4-pin ATX +12 Volt power cable didn't help.
The 6-pin PCI Express power cable was brought out,

http://www.playtool.com/pages/psuconnectors/connectors.html#pciexpress

Plugs into a graphics card.

[ Note*
In all power cables, Red wires are 5 Volts. Yellow wires are 12 Volts. ALL Black wires are Ground wires ]

Next in line was two versions of the 8-pin power cable.

A) 8-pin EPS +12 Volt power cable.
Originally brought out for server computers, that has multiple Processors.
Plugs into the motherboard.

B) 8-pin PCI Express power cable.
Brought out for more power, than a 6-pin PCI Express power cable could put out.
Plugs into a graphics card.

(6-pin PCI Express power cable is capable of handling 75 Watts.
8-pin PCI Express power cable will handle 150 Watts )

If you have an IDE (PATA) harddrive, a 4-pin standard Peripheral power cable is what you need. ('Molex' is the slang term for it's connector)

If you have a SATA harddrive you need a 15-pin SATA power cable.

NOTE*
IF, your SATA harddrive has a provision for a 4-pin standard Peripheral power cable, AND a SATA power cable;

ONLY USE the SATA power cable!

If you use both you will burn out the harddrive. Maybe not immediately, but I assure you down the road you will.
(Do not use just a single 4-pin standard peripheral power cable, either)

Optical drive/s use a 4-pin standard Peripheral power cable, if they are IDE (PATA) units.
If they are SATA units they use a SATA power cable.

The old Floppy Drives use a 4-pin small Peripheral power cable.
Same cable plugs into a Card Reader, also.

The plastic front of your computer is the Front Panel.

The area of contact pins on the motherboard, that the cables, (Wires), from the Front Panel go to, is the Front Panel header.

Sometimes abbreviated on the motherboard as;
F_PANEL 1, or FP1, etc.

I will need to know the computer manufacturer name, and Model Number, (HP = Product Number, or P/N), or the manufacturer name, and Model Number of the motherboard, to TRY to provide this information.

Post back in a Comment.

Regards,
joecoolvette

Apr 12, 2012 | Computers & Internet

2 Answers

Cannot find the sata plug on motherboard


A SATA harddrive uses a SATA power cable,

(15-pins, long connector. Harddrive side connector is usually a 90 degree elbow,

http://www.playtool.com/pages/psuconnectors/connectors.html#sata

Cables are usually Red with Black connectors, but cable, and connectors can be ANY color )

,and a SATA Data cable,

http://en.wikipedia.org/wiki/SATA

A SATA Data cable has the shorter connector. It has 7-pins.

{ SATA power cable provides power to the SATA harddrive.
The SATA Data cable is the information cable. Data,..information, is transferred back, and forth across this cable }

This is a 4-pin standard Peripheral power cable. The connector on the end of the cable is referred to as a 'Molex' connector.
(It is a misnomer. Molex was the first design name, from the first company who made it. The name stuck. Kind of like calling an open-end adjustable wrench, a Crescent wrench ),

http://www.playtool.com/pages/psuconnectors/connectors.html#peripheral

IF, the SATA harddrive has a provision for plugging in a 4-pin standard Peripheral power cable, AND a SATA power cable,

ONLY USE JUST THE SATA POWER CABLE

Otherwise you will burn up the SATA harddrive. (Maybe not right away, but I assure you it eventually will happen)

The connectors on the end of the SATA power cable, and SATA Data cable, have an L shape on the inside.

This L shape needs to be matched up with the L shape on the harddrive for the SATA power cable, and harddrive AND motherboard, for the SATA Data cable.

The beauty of SATA technology;

IF, there is more than one SATA connector (Header) on the motherboard, the harddrive can be plugged into ANY one of them.

For example if there are 4 SATA headers on the motherboard;
They can be labeled SATA 1, SATA 2, SATA 3, and SATA 4,
OR,
SATA 0, SATA 1, SATA 2, and SATA 3.

The harddrive usually plugs into SATA 0, or SATA 1.

With the SATA technology however, you can plug into ANY of them, and BIOS will find the device. (In this case a harddrive)

For the HP Compaq Business Desktop D330 computer, the motherboard is an Asus A8SN-CF (HP/Compaq name = Phoenix),

http://h10010.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00858789&product=321856#N31

All I see is one SATA header (Connector) on the motherboard. It is at the top right area, and is Black in color.
(Right below the thin green label on the edge of the motherboard, at the top. Third connector from the right)

Go down, and click on the + sign to the left of -
Motherboard Layout.

Look at the Top, and third connector over from the Right side.
You can barely make out - SATA1.

Motherboard installed in the computer case, the SATA 1 header (Connector) is at the Bottom of the motherboard.
Third connector (Black) over from the left side.

For additional questions please post in a Comment.
(Remember, there is NO such thing as a silly question)

Regards,
joecoolvette

Jan 16, 2012 | HP Compaq Business Desktop d330

1 Answer

Recently changed the power supply. There is no video output. Where can I download the motherboard schematic?


Right here at HP Support,

1) Motherboard Specifications:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00361570&tmp_task=prodinfoCategory&cc=us&dlc=en&lang=en&lc=en&product=459491

Scroll the page down to the top view illustration, and photo.

A) The motherboard uses a 24-pin ATX main power cable.
In the illustration the connector on the motherboard is on the right side.
It is an empty rectangular box with ATX Power Connector in it.

On the motherboard photo it is the rectangular white connector with two rows of 10 socket holes, and is to the bottom right of ram memory slot 2.

Another example of a 24-pin ATX main power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

Ensure that the 24-pin ATX main power cable's connector, is locked into place on the motherboard's connector. The lock tab on the main power cable must be hooked over the tab on the motherboard connector. This ensures that the main power cable is in all the way.

B) The motherboard uses a 4-pin ATX +12 Volt power cable.
The connector on the motherboard is a white square connector, with 4 socket holes.

In the illustration it is to the bottom left corner of the Processor socket (LGA 775), and has ATX12V underneath it. This power cable's connector also has a lock tab.
Another example of a 4-pin ATX +12 Volt power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

Power TO the motherboard, that's it.

Power FROM the motherboard:

C) System Fan, and CPU (Processor) Fan.

Abbreviated as SYS_FAN, and CPU_FAN to the bottom left of the ATX12V connector.
(4-pin ATX +12 Volt connector on the motherboard)

The System Fan is the computer case fan.
CPU Fan is the Processor fan.

D) The four SATA headers on the bottom right in the photo, (Blue, Orange, Black, and White), are for the SATA data cables.
They connect to a SATA harddrive, or SATA optical drive. (CD/DVD drive)
(They are an L shaped connector inside, with 7 pins inside)

Power for these SATA devices comes from the Power Supply.
The Power Supply has SATA power cables.
Example of an average SATA power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#sata

(L shaped connector with 15 pins inside. The longer connector between a SATA data cable, and a SATA power cable )

Did you forget which SATA data cable plugs into where, on the motherboard?
Don't sweat it.

The beauty of SATA is that you can plug the harddrive's SATA data cable into ANY of the SATA headers (Connectors) on the motherboard, and BIOS will find it.
Same with a SATA optical drive, or any SATA device, for that matter.

IF, your SATA harddrive has a place on the back for BOTH, a SATA power cable, and a 4-pin standard Peripheral power cable, ONLY use the SATA power cable.

Using both will eventually burn out the SATA harddrive!

Example of a 4-pin standard Peripheral power cable, (Misnomered as 'Molex'),

http://www.playtool.com/pages/psuconnectors/connectors.html#peripheral

From there the main optical drive, (CD/DVD drive), has to have the audio cable plugged into the audio connector on the motherboard.
(Plus the power cable, and data cable, of course)

In the illustration this is the header down in the very far left corner, and located towards the bottom edge.
It has CD_IN marked underneath it.

In the photo it is the Black rectangular connector in the very far left corner.

If you didn't connect the 4-pin +12 Volt power cable, your Processor isn't getting any power.
No Processor operating, No computer.

No Signal on monitor.
(No video signal)

For additional questions please post in a Comment.

Regards,
joecoolvette

Jul 24, 2011 | HP Compaq Presario SR1430NX (PS566AA) PC...

1 Answer

I have an HP XW8000 with a Matrox Parhelia 128MB card on Windows 7-32bit. I tried to upgrade the Matrox bios to better perform w/Win 7....but, it appears that the bios may not have taken properly and now...


never change BIOS unless:
1: the PC has issues, post them and ask at HP , no here.
2: if HP tells you to flash the BIOS, 99.9 % of time they will not.

where did you get this BIOS> HP, seems not.
BIOS must be carefully matched, too the hardware first.
this pc only supports XP , not W7, per HP official site.
so there is no W7 BIOS for any XW8000, period
so that means you got the bios FROM A VIRUS SITE, OR WORSE.
Did you pay cash for it, ? omg.

what we do is backup the bios , first
so there is a regression path, if it fails. as most do. (wrong bios)


the one and only correct bios is there at HP.
data title.
HP Workstation xw8000 System BIOS
JQ.W1.18_1.19 Rev. A3.9 MBMay 31, 2005


Matrox.
this PC came with 3 video cards, not one was a MATROX.
so did you flash it, you never said what you flashed.
here is a list of all possbible flash rom devices.
HP MOBO BIOS
Video cards. HP and 100s of others
HDD Bios.
DVD drives, vast rom updates.
RAID
SATA chip
this PC has over 24 FIRMWARE upgrades,
if you read the HP page, not one is for W7,
infact the last update was 2007, 2 years before w7, was released.

here is your official pages
id recommend getting it all, as HP is about to drop support on it.
the 10year rule , ok>
this one is 2005 PC, so is ending soon.

here are all your drivers, and such, NO MATROX.
https://support.hp.com/us-en/drivers/selfservice/hp-workstation-xw8000/96495

here is MATROX
they call it BIOS but its really BIOS extension for video only


http://www.matrox.com/graphics/en/support/drivers/previous/bios/

May 14, 2017 | HP (REFURB) HP XW8000 XPP X 2.6GHZ 2P 36GB...

1 Answer

Restore disk xw8000


I dont know if HP will have such Restore CDs since this machine is quite old but, you can restore such systems with a little know how. Your product key should be on the desktop (sticker) and you can use such product key when installing the OS (Windows, etc). I would see if you know anyone with an old Windows XP or Windows 2000 CD and you can load that then go to the following site for drivers.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=100870&lang=en&cc=us&taskId=135&prodTypeId=12454&prodSeriesId=96495

Aug 10, 2010 | HP (REFURB) HP XW8000 XPP X 2.6GHZ 2P 36GB...

Not finding what you are looking for?

Open Questions:

0 Answers

Losing data is a disaster. Never let that happen Use Cloud Backup'Call +1888784-9316 Cloud storage services are great for sharing files with friends and families, keeping documents in sync between all your devices, and so much more. Free cloud storage is even better! Several backup services offer free online backup plans. DataAlign is known for having the finest free cloud data backup software in the world! Not just being simple and automatic it can be customized to a large extent and not to forget the scheduling capabilities that allows it to run at any time of the day. With several years of experience in its kitty, DataAlign is the trusted innovators in free online backup solution. DataAlign is proud to be known as a market leader in providing Server Cloud Backup Solution based storage and individuals is our primary motto. Our innovative platform has been designed while keeping you in mind. To provide Cloud Backup For Small Business optimal user experience we focus on simplicity and this in turn ensures that you will be able to backup and access large data quickly and smoothly. Unlike other companies, there are no catch with DataAlign free cloud backup solution. With the kind of experience, you get with DataAlign, we strongly believe that you will eventually upgrade your account to a bigger one. And that makes us give awa Online Backup Pricing accounts as a free version with no strings attached. So drop your worries and and setup your free cloud data backup account with DataAlign. Just to clarify we will not ask for your credit card details upfront when you sign up for a free account. Keep using your free account as long as you need it. DataAlign has been designed with you in mind. You wouldn't require any technical skiil or IT degree to use it. Simply, upload your data and the technology will do the rest, enabling you to focus on what really matters; your business. Our dedicated support is readily available to answer any questions that you may have.

May 28, 2018 | The Computers & Internet

See all Tyan S2663 Xw8000 System Board Pn: 304123-001 Questions

Tyan S2663 Xw8000 System Board Pn: 304123-001 Logo

Related Topics:

1,105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tyan Computers & Internet Experts

Jerry Umali

Level 3 Expert

979 Answers

Larry Chandler

Level 3 Expert

1149 Answers

General Systems...

Level 3 Expert

5051 Answers

Are you a Tyan Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...