Question about Computers & Internet

Open Question

Mediagate I have a mediagate remote control (TSGP-IR01). I am writting a program in VB and most of the keys show up when I press them on the remote. Some of the keys do not show up in VB (such are the MORE key or inverted exclimation). Is this a windows message or why am I not seeing it? What do I have to do to fix it. E-mail me at skipperalfie@yahoo.com if you have any ideas for me to try. Thanks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: ViewSonic N3250W Locked

Yeah, my 19 year old daughter did the same thing. I found a solution on the 2750W thread
http://www.fixya.com/support/t115143-tv_just_flashes_different_colors

Solution - just press Menu, Enter and Power buttons at once.

Posted on Mar 12, 2008

Ad
  • 1861 Answers

SOURCE: yaris smart key programing with out scaner

There is no manual method to program a smart key. Impossible. You must use the Toyota scan tool. Sorry.

Posted on Sep 10, 2008

dvrsetup
  • 43 Answers

SOURCE: problems configuring Yahoo mail for Windows Mail

The most common causes of these error messages are problems with Internet connectivity and account settings configured incorrectly in Outlook or Outlook Express.

Perform the following methods in order. If one method does not resolve the issue, move on to the next one. The methods are as follows:

Method 1: Start Outlook in safe mode
Method 2: Create a new e-mail profile
Method 3: Delete suspicious messages from your mailbox
Method 4: Check your antivirus vendor’s Web site for additional suggestions
Method 5: Remove, and then reinstall Outlook Express
Method 6: Verify that all SMTP e-mail addresses in a distribution list are valid
Method 7: Examine the configuration of your firewall software

If your antivirus solution includes an e-mail scanning feature, you may have to perform additional configuration tasks to use Outlook or Outlook Express with the antivirus e-mail scanning feature.

Antivirus software that is known to have caused this problem includes products by the following vendors:

  • Symantec (Norton)
  • McAfee
  • Trend Micro (PC-cillin)
  • Panda

Posted on Jan 17, 2009

  • 2 Answers

SOURCE: Remote control not functioning properly

buy yourself a GE 94221 universal remote (Home depot $6) and use DVD code 0947 to control the Coby dvd 224.

Posted on Jun 10, 2009

D_N_R
  • 14 Answers

SOURCE: my mail to yahoo addresses is sent back undelivered

Welcome to FixYa,

This is a major problem faced by many users, AFA I Know the Reason is that the time on the sending machine was wrong – it was set Some time before in the future. It seems Yahoo won’t accept mail sent from the future, so if you are getting similar rejection messages check your system clock.

I hope this will help you out, IF not then you better Contact yahoo help and report this issue, because there are equal possibilities that there is some malfunctioning on the server side.

If you think I was of help, your token of appreciation in the form of rating will be esteemed.

Posted on Feb 23, 2010

Testimonial: "Excellent, your solution was simple but not one that would have occurred to me. Thank you very much"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Resync polo key 2000 how do ido it i have spare key


Remote Control Programming (1997 ON)

Procedure
1. Switch Ignition ON and leave the key in the ignition.

2. Mechanically lock the vehicle using the Drivers door using a second
key.

3. Using the remote control press the Unlock button once, and the horn
will sound once.

4. Wait 6 seconds and press the unlock button once to activate the coding
procedure. The remote control will now be programmed.

NOTE : When performing programming on additional remotes the procedure
is the same, except you press the unlock button 2, 3 or 4 times for the
different remote.

For example : If programming 2 remotes press the unlock button twice with
a 1 second interval between each press, repeat for 3 and 4 remotes.

5. Switch Ignition OFF.

6. Remove key from ignition and check for operation.

7. The coding procedure can be repeated up to 4 times for additional remotes.

8. The ignition must be switched OFF between programming each remote
control.

Mar 18, 2017 | Volkswagen Polo Cars & Trucks

2 Answers

How to program a rcr804bfdr to a sanyo tv


Programming the RCA RCR804BR or RCR804BFDR Series Remote Control
Programming with Direct Entry:
To program your remote to control up to four components, follow these steps:
  1. Manually turn on the component you wish to program the remote to operate.
  2. Find the four-digit code for your brand of TV, VCR, DVD, satellite receiver, cable box, or digital TV converter in the enclosed code lists.
  3. Press and hold the CODE SEARCH key until the indicator light turns on.
  4. Release the CODE SEARCH key.
  5. Press and release the TV, VCR or SAT·CBL·DTC key. The indicator light blinks and then remains lit. Note: DTC references digital TV converter. To program the DVD·AUX key: Press the DVD·AUX key. To control a DVD, press the VCR key. To control a TV, press the TV key. To control a satellite receiver, cable box, or digital TV converter, press the SAT·CBL·DTC key. The indicator light stops blinking and remains lit.
  6. Enter the four-digit code, using the numeric keypad. After the code is entered, the indicator light turns off. Note: If the indicator light blinks multiple times, you've entered an invalid code. Start from step 2 again.
  7. Aim the remote at the component and press the ON·OFF key. The component should turn off. Note: If your component does not respond, try all the codes for your brands. If the codes do not work or your brand is not listed, try the Code Search Method that follows.
Programming with Code Search:
If your TV, VCR, DVD, satellite receiver, cable box, or digital TV converter does not respond after you have tried all the codes for your brands, or if your brand is not listed, try searching for your code via the Code Search Entry Method. To program your remote via the Code Search Entry Method, follow these steps:
  1. Manually turn on the component you wish to program the remote to operate.
  2. Press and hold the CODE SEARCH key until the indicator light turns on.
  3. Release the CODE SEARCH key.
  4. Press and release the component key you wish the remote to control- TV, VCR or SAT·CBL·DTC key. The indicator light blinks once and remains lit. Important: Find the ENTER key on your remote (don't press it yet). You will need to press this key quickly in step 6 below. To program the DVD·AUX key: Press the DVD·AUX key, followed by the component key you wish the DVD·AUX key to control. For DVD, press the DVD·AUX key, followed by the VCR key. For an auxiliary component, press the DVD·AUX key, followed by the corresponding component key ( TV, VCR, SAT·CBL·DTC ).
  5. Press and release the ON·OFF key until the component turns off. Important: You may have to press the ON·OFF key up to 200 times.
  6. As soon as the component turns off, press the ENTER key within 4 sec- onds. The indicator light turns off. Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next code-you will need to start the code search from step 1 again.


Dec 24, 2014 | RCA Televison & Video

1 Answer

Key code


Well you don't actually program the key, you put the car into a condition so it will "learn" the remote to use with it.

Procedure
1. First open a window (just in case) use existing key (if you have one) place in ignition and turn to ON (RUN position), do not start the engine.
2. Use the new key to lock the car, the key not the remote. Now press one of the buttons once on the new key transponder, the lights should flash, wait 10 seconds and press the unlock button, the doors should unlock and the key should be recognized by the car's security system.
3. If you are programming a second key repeat the above but press the remote button twice, three times for a third key.

Alternative Method
Procedure
1. Switch on ignition; system will then remain in programming mode for 30 seconds.
2. Briefly press any button on the remote control unit while the unit is in the ignition.
3. The central locking system locks & unlocks to show that the remote control has been programmed into the car's security system as a valid remote now paired to that car.

Jul 12, 2014 | 2006 Opel Astra 1.8

1 Answer

How to program tsgi-ir01


Programming procedure is too much to type in here by this window, and is not practical. If you wish to get details; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/

May 05, 2014 | HP TSGH-IR01 Remote Control

1 Answer

How to program hp tsgh-ir01 remote


Programming procedure is too much to type in here by this window, and is not practical. If you wish to get more details, check the sites linked here. Set-up code list, and Set-up procedure to many popular brand remote controls are given. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

Nov 08, 2013 | HP TSGH-IR01 Remote Control

1 Answer

I have a Memup mediagate VX series and I dropped my remote control and now I need to replace it. I bought a universal remote control from Hama but in the code list there isn't any code for memup. I...


What is the model of remote that you purchased?Some of these remotes can be programmed by following a simple set of instructions for setting up a device,see if there is some instructions that show you how to do this method and try this first before trying another remote!!

Sep 04, 2013 | Televison & Video

1 Answer

The subtittles on the tv I cant turn them off and its really annoying to watch the shows with all the writting in the way I tried holding the subtittle key on the remote down but it doesnt work pleaseee...


Hello
The only way to turn OFF subtitle is, press the subtitle key on the remote control itself. If it doesn't work, either your remote's subtitle key is not working properly or your remote control may not be the orginal one. To check the working of the subtitle key; you must have a cellphone with camera option. Hold the remote control in fromt of the camera lens of your cellphone, after set it to camera option, press the subtitle key, and see if an infrared image falls on the screen of the cellphone. Infrared rays, comes from the remote control cannot be detected by human eye, but electronic camera can sense it. Check this. Sometimes the switch may be faulty. If so, you have to open your remote control and clean it. Clean its inside printed circuit baord, and inner key pad buttons with a soft cloth dipped in pure alcohol or medical quality turpentine. Never use hard solvents like petrol or thinner, as they will damage both the plastic cover and inner rubber parts. If these does not help you, you have to buy an other remote of same number. OK.

Apr 07, 2011 | Toshiba MW24FN1 24 in. TV/VCR/DVD Combo

1 Answer

I have a Nexxtech IT009 remote and a HTS Dish Network converter box. What is the remote's codes and how do I program them?


http://www.tivocommunity.com/tivo-vb/showthread.php?s=&threadid=128743
Above are all the codes for the HTS box,one of these should work with your remote.
Nexxtech codes below.
www.jascoproducts.com/support/download.../RemoteCode-4-digit.doc

Try using the code search to programme your device.

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the P (Program) button until the red indicator stays on. Release the P button.
3. Press and release the desired mode button (TV,VCR, etc.). The red indicator blinks, then stayslit.
4. Press the Channel Up button repeatedly (up to 300 times) until the device to be controlled changes channels. If you accidentally overshoot the desired code, press the Channel Down button to backtrack through the library until the device changes channels. Pressing Channel Up changes the direction to forward again.
5. Press and release the Enter button to set the code.

If you still need a code list email, support@orbyxelectronics.com or call 1-866-363-3059.

Aug 13, 2010 | DISH Network IR Remote Control

1 Answer

Trying to program my At&t Uverse remote to my


Sherwood Receiver/Amplifier 5027 Sherwood Receiver/Amplifier 5027

always press the mode key of the device they want to control before pressing any other key

Power on the device

  1. Press and hold the appropriate Mode key (TV, DVD or AUX) on the remote control.
  2. Without releasing the chosen Mode key, press and hold the OK key simultaneously.
  3. Release both the Mode key and the OK key at the same time.
    All the Mode keys should flash twice.
    1. Enter the four digit setup code by pressing the number keys (0-9) on the remote control.
    2. The Mode key will flash three times indicating correct entry and return to normal operation.
    • When an invalid code is entered, the selected Mode key will give a long flash to indicate that the Member has not entered the setup code correctly. Start over beginning at step 3.
    • Should the remote control time out before the Member completes the code setup, they will need to start over.
    1. Point the remote control at the programmed device and press the Power key once.
    2. The device should turn off.
    • If it does not turn off, repeat steps 2 through 6 trying each code for the brand until the correct code is found.
    1. Repeat steps 1 through 7 to program other devices if needed.
    2. Press the appropriate Mode key on the remote control to work with the selected device. To use the remote control for the Member's U-verse TV Receiver again, have them press the AT&T Mode key.

    Sep 05, 2009 | Sherwood RX-4109

    1 Answer

    Sony cd/dvd player dvp ns67p with black screen show


    try switching the plug ins ( the colour wires9red,white,red)

    Dec 16, 2008 | Sony DVP-NS300 DVD Player

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    31 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...