Question about Televison & Video

1 Answer

Dynex dvr remote serial # JX-8029A(2)

Can this remote be fixed or replaced for my DVR

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

Yes it can be fixed

Posted on Jul 11, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: Remote Control Codes don't work with my LCD TV

There is no code!!! -- Solution...You have to buy a universal remote with learning capabilities. I’ve ordered one that will not only learn off other remotes but can handle 10 components also. I got it from 10x it’s called the iconRemote control…if you call the company they will give you a discount (but you have to call them and ask) AWESOME!

Posted on Mar 01, 2008

  • 1 Answer

SOURCE: vizio and the directv dvr

Vizio recommends using code 11758 or 10178 for Cable/Satellite universal remotes that use five digits such as DirecTV. For four digit Cable/Satellite universal remotes , use 1758 or 0178. For three digit Cable/Satellite universal remotes, such as Dish or Echostar, use 627. These codes typically make the Power, Volume and Mute functions work.

Posted on Feb 01, 2009

  • 5 Answers

SOURCE: When DVR is connected to the TV the picture gets distorted

Most Electronic equipment product now they use Miroprocessor run with soft ware they design ,if the equiptment you buy on the market dont match with other company you cannot use it

Posted on Feb 16, 2009

vortash
  • 431 Answers

SOURCE: dynex 32" went black w/ only audio now present

Without looking at the set and from what you say , it sound like the chroma stage has a fault on it . However sometimes it can be that someone has messed with the settings in the menu and caused this problem so check that first .
If you find they are ok then I am afraid the only solution is an engineers inspection , the chroma chip will almost certainly be surface soldered and these require special equipment to repair them safely ..The other possibility is that if you have a cable or Satelite box attached the fault could be in them and not on your television set :.. it's just not recieveing a picture from them . disconnect them and try you television on its own first .... Regards Vortash

Posted on May 01, 2009

housejess
  • 317 Answers

SOURCE: I need a tv code for my 32in. olevia flat panel

11144,11240,11331,11610

Posted on Nov 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

DISH Solo VIP612 DVR Quick Reference Download 2


Download DISH Solo VIP612 DVR Quick Reference Guide

6ffe69d.jpg

Would you like to review the features of the DISH Solo DVR VIP612?

Have you lost your DISH Solo DVR VIP 612 Quick Reference Manual?

Would you like a digital, searchable, pdf version of the DISH Solo DVR VIP 612 Quick Reference Guide?

Follow this link (& click FREE) to download a pdf version of the DISH Solo DVR VIP 612 Quick Reference documentation.

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | Televison & Video

Tip

DISH VIP612 Program AUX Remote Code 2


DISH Solo DVR VIP612 Program AUX Remote Code

7c06801.jpg

Would you like to program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your receiver, tuner, stereo, second TV or second VCR using your remote's AUX mode? (Instructions to setup a primary TV or a VCR are a little different, but can be found here.)

e818a57.jpg

To setup your Dish Solo DVR VIP 612 Universal Remote, follow these steps to enter the remote control codes to control a device with the AUX mode:

  1. Turn the device you would like to control on.
  2. Find the brand name of the device you would like to control in the control code tables on page 112 of the Dish Solo DVR VIP 612 User Manual.
  3. Press and hold the AUX mode button until all the other buttons light up, and then let go. The AUX mode button will flash.
  4. Press 0 for a TV, 1 for a VCR, or 2 for a receiver, amplifier or tuner.
  5. Enter one of the three-digit codes from the tables in the manual.
  6. Press POUND (#). The mode button will flash three times.
  7. Press POWER to turn off the device. If the device does not turn off, skip to step 9.
  8. Turn the device back on and try some of the other buttons to make sure they work. If the code works, stop here.
  9. If the code didn't work, repeat steps 3 through 7 with the next device code from the tables in the manual.
Your device control codes for your amplifier or other AUX device are now programmed into your DISH Solo DVR ViP 612.

Now you probably want to set your Dish Solo DVR VIP 612 Universal Remote up so that it always controls the volume of your stereo, rather than of your TV, regardless of whether it is in SAT, TV, VCR or AUX mode. Help for this remote control programming can be found here.

(Help for programming a TV or VCR using the TV or VCR mode buttons can be found here.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | Televison & Video

1 Answer

Dynex dvr remote


The replacement battery may be no good or may have been installed incorrectly

Jul 11, 2013 | Audio Players & Recorders

1 Answer

Samsung dvr 7162 need to reset password


please help me to reset password Samsung DVR SHR7162

Dec 24, 2012 | Samsung Shr-7162-15t Dvr Shr7162 Techwin...

Tip

DISH Solo VIP612 DVR Manual Download


Download DISH Solo DVR VIP612 Manual

d2b4463.jpg

Would you like to review the features of the DISH Solo DVR VIP612 ?

Have you lost your DISH Solo DVR VIP 612 Owners Manual?

Would you like a digital, searchable, pdf version of the DISH Solo DVR VIP612 Users Guide?

Follow this link (& click FREE) to download a pdf version of the DISH Solo VIP DVR 612 documentation.

I hope that helps.
____________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 04, 2010 | Televison & Video

1 Answer

I have direct tv dvr my remote wont work,but remote works on my other recivers,has the ir gone bad and can it be fixed


Hi,

It's possible that the IR receiver in the DVR has failed. It's unlikely to be the remote as it works with other devices. If the remote was working with the DVR before, then in most cases the problem can be corrected by resetting the DVR as follows:

Press the RED RESET BUTTON behind the access card panel on the front of the DVR. Wait for the program guide information to update then try the remote again.

Try this and post back if you need further assistance.

Regards,
BElectric

Dec 07, 2010 | Directv Plus DVR DTV Receiver / 100-Hours...

1 Answer

DISH DVR doesn't respond to remote


  1. If this is a TV2 location take the remote to the location of the DVR.
  2. Open the door on the right side of your receiver.
  3. Press SYS INFO.
  4. Press Record multiple times on your remote.
  5. Exit the screen and see if the remote works, if not replace the batteries and repeat steps 1-4
  6. If the remote still doesnt work, and this is a tv2 location (no receiver in the room with the tv) check the antenna on the back of your receiver, make sure that it is connected tightly and standing straight up.
  7. If none of this works call Dish and ask for a new remote.

Jan 22, 2010 | DISH Network ViP622 DVR DTV Receiver /...

2 Answers

I want 2 configure a DVR from remote place and not from the intranet. kindly help me out in solving the issue


To configure the DVR from a remote location you can do it one of two ways:
Create a vpn connection through your router if it supports it or an external units to the remote location. This will make the remote location appear to be local to the dvr.

You can also setup the dvr's internal IP and port on your router through port forwarding. This way certain network access or traffic will be passed directly to the dvr from outside your local network.

Nov 12, 2009 | Dome 4 CCD CCTV Camera Surveillance...

1 Answer

The model number for the remote is Sansui DVR 810


Try this website 1-800-Remotes Factory Original.Use ur DVR box as the serial number.They have everythings link to TV- VCR-DVD,and more all remotes.












Oct 22, 2009 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5343 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...