Question about Dishwashers
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With registration, you can probably get a download of your manual (user guide) here:
It may not contain the info you need since appliance service people hate do-it-yourselfers and, in my mind, manufacturers collude with them.
Can you believe that many TVs, radios, PC monitors etc. once came with complete circuit diagrams?
Posted on Jun 29, 2008
SOURCE: E2 error in smeg dishwasher
e2 is overfill or flooded base.
take the bottom front panel off and see if there is water in it and if so, mop it out. if it reoccurs, then you have a leak.
you will see a float device in the front approx middle and this is what actuates e2. if fault is intermittant, try putting a small weight on this - a washer for example.
if e2 is being caused by overfill and not a flooded base, then the water intake moulding needs replacing
Posted on Nov 20, 2008
SOURCE: error code E2
Error Code E2 means the pump is blocked. The remedy is to take the filter out which is underneath the bottom dish basket and ensure its is clean and free from debris. Then use a small container to empty the water sitting in the bottom of the machine/filter housing and ensure that no waste is stuck in the bottom. That should clear it
Posted on Nov 26, 2009
see your instruction manual, and go to the section troubleshooting and fix it.
if you do not have i.manual download from www. retrevo.com or www.fitness.manualsonline.com
God bless you
Posted on Jun 20, 2012
Testimonial: "thanks a million for the help....amanda"
Tips for a great answer:
Jan 27, 2016 | Computers & Internet
Nov 26, 2015 | Dishwashers
Oct 15, 2015 | Oster 1.7 L Variable Temperature Electric...
Mar 08, 2015 | Samsung Dishwashers
Hey friend, thank you for your inquiry!
The "E2" error code means that thermistor/turbidity sensor has failed. This can be corrected by replacing the turbidity sensor or main control board. I would suggest contacting a professional to come and properly diagnose your appliance to avoid any unnecessary part purchases. -Matt
Aug 29, 2014 | Electrolux Dishwashers
Dec 27, 2010 | Dishwashers
May 24, 2009 | Baumatic 23 in. BDW13 Built-in Dishwasher
Aug 31, 2008 | Smeg DWI614 Built-in Dishwasher
Feb 27, 2008 | Hobart 29 in. AM15-1 Free-Standing...
Dec 13, 2017 | Dishwashers
18 people viewed this question
Usually answered in minutes!