Question about Canon IR1024IF 220V 240V AC10 50/60HZ

Open Question

Canon iR1024if giving blank copies

The copier started printing blank copies just yesterday the toner is full, Drum is fine i have tested it on another other copier and it is working thanks.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 62 Answers

SOURCE: Canon NP-4050 printing almost completely black pages

This problem appears to be that the scanlamp cable has fatigued and become open-circuit. This can be checked by selecting A3 and pressing the START button while having the lid up. Watch to see if the light stays on all the way through the forward pass of scan cycle, it can be intermittent. Make sure that the machine is unplugged before attempting to replace the cable.The drum is definitely on its way out at that amount of copies, but can be made to last a fair bit longer with some fine-tuning.

Posted on Nov 09, 2007

  • 1 Answer

SOURCE: Actually a Canon PC-65, problem follow-up

canon older model PC_6RE problem: the third copy and byond, streeks appear on the left side, progreesivly get worse on each additional copy, a wait of about 2,hours, then the 1st copy is clear again, any solution for this?

Posted on Mar 19, 2008

  • 82 Answers

SOURCE: canon faxphone l75

what does it say on the display

Thank You,


Mikey

Posted on Apr 06, 2008

  • 47 Answers

SOURCE: re: canon ir3100cn E000020-0081

I just spent 20 min typing a detailed post why the e225 is already fixed and the e020-0081 is common and means the drumm patch sensor is dirty and then the web site erased it. Grr.

The drum patch sensor shines down at about the 11 o'clock position halfway down the drum. Remove the drum taking care not to scratch it or the transfer belt and clean the sensor window.

If the problem re-occurs then you may need new developer units.

Posted on May 30, 2008

  • 134 Answers

SOURCE: hi ya have a canon ir2010

Looks like a worn out or dirty drum unit. I believe you need a service center to replace this drum or service it.

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

White "lines" on copies and prints ? - side to side every 1.5 inches ( approx) is blank ( no toner) creating "lines".


the drum is light sensitive and if one side was exposed to sunlight for as little as 20 seconds could have that effect , it is at best a shot in the dark (no pun intended)

Jul 13, 2013 | Sharp AL-1642CS Copier

1 Answer

Why does my samsung scx5530fn printer constantly prints blank sheets of paper...we have turned it off/on; changed toner and it just decides to starting printing blank pages..anybody can help me i thank...


Please clean the drum and the fuser, also check the toner cartridges if there's any overflown toner powder spilled. The problem is caused when the toner waste tank in the drum is full or overflowing.
Good luck.

Thanks for using FixYa.

Jun 25, 2010 | Office Equipment & Supplies

1 Answer

When i start to print it always gives me paper jam and print fain


Clean beeneth copy glass and even the laser unit.
How many copies do you have with present drum unit?
If over 50000 copies change the drum too.

May 25, 2010 | Canon iR 2016i Black and White Copier

2 Answers

The printer runs properly but will not print; A blank page cycles


It is not the toner. There are 2 things you can try yourself, anything else requires service. First try opeing and closing the right hand side door. Try this several times if necessary. There are contacts in this door that sometimes don't make contact and opening/closing the door will sometimes resolve blank copies. The other thing you can try is remove the toner then pull out and reseat the drum unit. Here again there are contacts that need to be made that can cause blank copies.
Good Luck and Thank You for using Fixya.

Apr 09, 2010 | Sharp AL 1631 Copier

1 Answer

My al-1631 gives blank copies. just replaced toner. no warning lights of any kind. no message lights. it just prints out blank paper. could it be the drum? can't find instruction manual. purchased...


Was the copier working fine before you changed the cartridge? If so I think your cartridge is the problem. If it started making blank copies right after you changed it. If this is not the case the first thing I would say is it is not the drum. Try opening and closing the right side door. There are contacts in the door that will cause blank copies. I have had several customers do this and it fixed the problem. You can also try pulling out the toner and then pull the drum unit partially out and re-seat it. Then re-install the toner.
Good Luck

Jan 05, 2010 | Sharp AL 1631 Copier

1 Answer

Removed paper jam and now copies are blank.


Drum Memory
Make about 5 to 10 prints; then, leave the machine in the office environment (normal temperature/humidity conditions)

* This symptom is noticeable in a low temperature/ humidity environment, and is absent under normal environmental conditions.

* This symptom occurs in keeping with the primary charging roller rotation (38 mm).

Sep 13, 2009 | Canon imageCLASS D780 All-In-One Laser...

1 Answer

It has plenty of ink and the drum is good but it stopped printing


All blank pages could either mean: On the scanner side: * Mechanical error, you'll need to perform service on it to reanimate it again. * You can check if it is on the scanner side by printing a test page on the printer. If it prints fine, the problem is in the scanning process.
On the printer side: * Dirty connectors between toner/drum unit and machine. Remove the toner/drum package and clean the metallic cylinders on the left and right side of the toner/drum unit, then reinsert package into machine. * Bad toner and/or drum unit. Replace should solve it. * Mechanical error, you'll need to perform service on it to reanimate it again. * You can check if it is on the printer side by either scanning to a connected PC or sending a fax to someone. If the scanned/faxed page looks fine on the pc/fax that receives the fax, the problem is in the printing process.

Jun 02, 2009 | Brother MFC 9700 All-In-One Laser Printer

Not finding what you are looking for?
Canon IR1024IF 220V 240V AC10 50/60HZ Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1972 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...