Question about Cell Phones

Open Question

Scopetronic homeguard alarm

I am moving into a new house, how do i reset the code for this alarm and is there generally a mastercode alarm also? thanks

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 316 Answers

SOURCE: nokia 1600 security code

security code is 12345 by default

Posted on Nov 15, 2007

vrabhilash
  • 52 Answers

SOURCE: Reset master code for Nokia N73

If you know the risks, try this ONCE and ONLY ONCE and let us know if it works. You have only 3 to 5 tries and then it will be hard locked. After that you will need a cable thing-a-me-jiggy to unlock it. It will still work on your Network so no big loss.

#pw+314646531133130+7#

Remove sim first,power on the phone.
After the phone boots up, press #
Press * 3 times fast for (p) \
Press * 4 times fast for (w) IMPORTANT
Press * 2 times fast for (+) /
and the rest of the code---

IMPORTANT!!
Verify code before pressing the last #.
Pay attention. You only heve about two seconds.

Note:If nothing happens. Some Phones require that you to insert a non accepted sim. Before you do this, make sure the sim you use does NOT have a security PIN CODE. If it does, reset the security code to default 12345 with the original phone. Insert a non accepted SIM and turn it on. You will see "phone restricted", select the UNDO option,then enter the code in the restriction box and press ENTER.

"Phone restrictions off", it's unlocked.
"Error code" wrong code.STOP tell me.
"Not allowed" or "Can Not Undo Restriction" it's hard locked. Used up all your free tries!!


Pls let me know, if it works for u...

Posted on Jul 17, 2008

  • 1 Answer

SOURCE: how to reset nokia 1600?and how to use mastercode?...

How to reset nokia 1600?

Posted on Sep 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Accenture alarm


Default code for ade accenta panels is 0123

Feb 07, 2014 | Home Security

1 Answer

How to reset master code on adt alarm system without original master code


try 1234,just for kicks and giggles. if that does not work, I need to know system type.

Dec 01, 2012 | Home Security

2 Answers

I accidentally locked myself out of my Smarthhome Securelinc Alarm Installer Code Model OH-41073AT. I would like to reset the unit to my installer code or create a new one. Can you assist?


The first thing to try would be to disconnect the mains supply and remove the internal battery for a minimum of 5 minutes and then reconnect it.

If this doesn't reset the system then remove the mains supply and battery again for another 5 minutes.

After 5 minutes reconnect the battery.

Then with the help of a friend try holding the # & * keys while they turn the mains supply back on.

These are generic resets for most house alarms but I'll keep looking if there's a specific one for your system so if neither of these work just let me know.

If I find anything else in the mean time I'll add to this post.

Jul 06, 2011 | Visonic INC Smarthome SecureLinc Wireless...

1 Answer

I bought a house with a DIGITAL FRONTIER. DFA3400 Hybrid Alarm System but no manual, I do not know how to set the alarm and to put in a code to deactivate the alarm. I need an owners manual.


Key in the 4 digit passwrrd and press "A" button, this will delay for a few minutes for you to leave the house, lock the door before activation.

If you are at home and want to arm the alarm immediately, key in your 4 digit password and press H button and the alarm will arm immediately (except certain zone such as IR, since you do not want to trigger this while moving around inside the house).

To disarm just input the 4 digit password. Please see or download the manual attached for programming new password and other functions.

8_11_2012_4_02_26_am.png

Feb 10, 2011 | Vacuums

1 Answer

I move into a house that had a alam system by att


I assume that you do not have an alarm code to turn the system off.Contact the Professor and he can walk you through a defaulting of the alarmpanel.

AlarmProfessor.net

Apr 21, 2010 | Ademco CIA Modem

1 Answer

I have a Bosh solution-16 Home security system which was there when we moved to our new house. The problem is that the access code was unknown. Therefore I manged to reset it from the main board. and the...



I know you don't want to pay an alarm technition to solve your problem....thats why your here, but in this case, I dont recommend you do this yourself... Call an alarm specalist, Some of these alarm panels require specalized programming and specific access codes you won;t be able to get a hold of. All of them are different. The safety of you and your family is worth more than a $75.00 service call.

Aug 30, 2009 | Code-Alarm Code Alarm Transponder

2 Answers

Optima house alarm


after a power cut alarm goes back to factory setting 0123. you need to use this code to re program alarm

Jul 31, 2008 | Computers & Internet

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

William Alequin

Level 3 Expert

922 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...