Question about Garden
Yard an riding lawn mower.ET1238. Model number 132-655F595 Where can I get an owners manual?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Locate the tag with your model and serial number on the tractor. Be sure you get the number EXACT or it won't work.
Go to Murray's website and download it. They usually have parts listings at the back of the Owner's Manual
Posted on Oct 04, 2009
Go to www.searspartsdirect.com , put in your model number and it will take you to the parts listings for that model, also, if you look to the right side of the page there is a link to download a full Owner's and Parts manual
Posted on Oct 12, 2009
Testimonial: "Thank You"
SOURCE: MTD Products- Yardman
The part number is 770.8637M, You can find it at www.mtd.com, click on yardman logo, click on owner's manual. Put in Model # 13ag675g196, Serial # 1a027130180. It will bring up the manual you are looking for.
Posted on Dec 23, 2009
First off, confirm that the tractor is in Neutral and the deck is not engaged. You also need to be on the seat, and in some cases your foot must be on the brake. Then try it.
If by "jump" you mean essentially connect one end of a jumper cable to the battery power coming to the solenoid, and the other end of the SAME jumper cable to the 6 gauge (+/-) wire on the other side of the solenoid that goes to the starter, and it cranks, this means one of two things.
More than likely it is the solenoid that is bad, but the only way to confirm this is to make certain that when you turn the key, it sends power to the small (18 gauge) wire on the solenoid. This is easy to check with a test light.
If power is goes to the solenoid when the key is turned, but the engine fails to crank then the solenoid is bad.
If no power is there, then the problem has something to do with either the ignition switch or ignition wiring, or more likely it is a failure of one of the safety switches, under the seat, transmission in gear, sometimes if the deck is engaged, or other.
One way to confirm that the problem is with a safety switch or ignition switch and rule out the solenoid would be to jump a wire directly from the positive terminal to the small wire on the solenoid that comes from the ignition. If this causes the engine to crank, then the solenoid is OK.
Posted on May 09, 2010
Tips for a great answer:
Sep 17, 2014 | Garden
Aug 29, 2012 | Yard Man Garden
Aug 14, 2010 | Yard Man Yardman Riding Lawn Mower 38in...
Aug 04, 2010 | Yard Machines Garden
Dec 22, 2009 | Craftsman 24 Hp 48" Deck Yard Tractor
May 04, 2009 | Briggs & Stratton Garden
130 people viewed this question
Usually answered in minutes!