Question about Exercise & Fitness

1 Answer

Error code 02

I'd like to know what error code 02 means for this model of treadmill and if there a way to reset the error. many thanks. best regards Giacomo

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 12,223 Answers

Normally is a faulty PCA, RAM memory, or eeprom faulty. Reset the machine, and if the problem persist adjust the REED switch, see the diagram, clean it, test for open or faulty, clean the connector and tight very well.
Open the display board, and clean the ribbon cable with pencil eraser the contacts from dirty and corrosion. You can use the contacts cleaner for the rest of connector, clean it very well from dirty, corrosion. and try it. see the diagram attached.
God bless youError code 02 - 75cd6ef2-2cc7-4b73-bb3e-036688210718.gif

Posted on Jul 11, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Hi, have lost the manual for my treadmill York

Error 7 is a Safety Key Error....
That's the red circular magnetic insert that slots into the front of the console...
The manual says : Simply secure the safety key in place and then 
try again..
hope this helps

Posted on Apr 20, 2009

  • 2 Answers

SOURCE: york t500 treadmill model no:LQ6010 showing err07 when turned on

Error 7 is a Safety Key Error..
that's the red magnetic circular thingy on the console.
Simply secure the safety key in place and try it again

Posted on Apr 20, 2009

  • 1 Answer

SOURCE: Sears lifestyler 8.0 Treadmill EEEE error code

64d4644.jpg Wiring diagram

Posted on Apr 12, 2010

  • 1 Answer

SOURCE: Error code "SI 2" for ironman triad treadmill

You need to replace the motor control board located in on the base. If your both motors work along with your display added that you've done the reclibration then you must replace this board. I did and the unit works so far. 200 dollars is what you wil be spending.

Posted on Apr 16, 2010

guru_fixya
  • 944 Answers

SOURCE: Vision Fitness T9450 Treadmill error code "E4."

Hi,

E4 means
- Elevation parameters out of range
- Recalibrate it

If you want to calibrate it see the manual page no 5.

Click here to download the manual

post a comment for further assistance.
Thank you for using fixya have a nice day:-)

Posted on Sep 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a bh fitness treadmill model number G6414v and its got an e-02 and e-07 error on screen . What do I do


I don't know what this has to do with washing machines???

On your BH F1 treadmill here are their listed errors.

E1
Possible cable fault.
Connect the wire well between top
controller and bottom controller

E2
Burst clash.
Operating with incorrect voltage; Connect
the motor wire again.

E3
No speed sensor signal
Replace the sensor light on the bottom
controller or speed sensor.

E5
Possible motor overload.
Lubricate the belt.

E7
Safety key.
Insert the safety key.

Here is the manual, page 12 is the troubleshooting and error codes in English.

http://www.bhfitness.hu/shop_ordered/69670/pic/english-manual/G6414U_Monitor_manual_v2-3226.pdf

Jul 26, 2016 | Exercise & Fitness

1 Answer

How do i fix a lifegear treadmill 97520?


Try below:

ERROR CODE
DESCRIPTION
E1
Speed error (The treadmill running speed is 3.2 kph faster than the displayed
speed). The treadmill will stop immediately when the console detects this error.
E2
Speed error (The treadmill running speed is 3.2 kph slower than the displayed
speed). The treadmill will stop 16 seconds later after the console detects this
error.
Troubleshooting / Resetting error codes
In the rare event of the treadmill displaying an error code ("E" followed by a number), simply reset
the computer by:
1. Step off the treadmill. Ensure that you are clear of the running belt.
2. Turn the treadmill off at the master power switch located near the motor housing.
WARNING: Ensure nothing is positioned near or under running belt which may possibly block
it's normal operation.
3. Turn the treadmill on at the master power switch.
4. Ensure that the Safety Tether Key is securely and properly installed onto the console or just
reinstalling the Safety Tether Key can also reset the display.
If the above does not clear the error code, please contact the nearest Dealer/Service Center

LifeGear 97320 Owner Manual Page 17

May 22, 2016 | Exercise & Fitness

1 Answer

I have A Life fitness 9100 treadmill The display shows the message "maintenance notes wax over" how can I remove this error?the treadmill will not turn on HELPPP


see this steps and fix it. .Of course you must read your instr. manual or download from www. iconservice.com
When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

  • 2 Press the "ENTER" button three times to access the treadmill's error log.
  • 3 Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.
  • 4 To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.
  • 5 To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.
  • Oct 17, 2012 | Life Fitness Lifestride 9100 HRT...

    2 Answers

    E5 error code on sportcraft tx400 treadmill


    E5 erorr code for my gait keeper treadmill ,it starts up after few seconds ,it stops
    and error code appear.Can you tell me what this means? How to solve this problems?

    Nov 24, 2011 | Exercise & Fitness

    1 Answer

    How to reset treadmill T630


    Dear Sir:

    I will try to help you.

      • 1

    When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

      • 2

    Press the "ENTER" button three times to access the treadmill's error log.

      • 3

    Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

      • 4

    To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.

      • 5
    To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted

    If you need further assistance, please reach me, sincerely.

    God bless you.

    E.CUADRA
    MANAGUA, NICARAGUA. C.A.

    Oct 24, 2011 | Exercise & Fitness

    1 Answer

    Unlock the code on Precor treadmill?


    Dear Sir:

    Please try with this Reset system for Code:

      • 1

    When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

      • 2

    Press the "ENTER" button three times to access the treadmill's error log.

      • 3

    Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

      • 4

    To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.

      • 5

    To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.


    If you need further assistance, please reach me. sincerely. God bless you.


    E.CUADRA

    MANAGUA, NICARAGUA. C.A.

    Oct 23, 2011 | Exercise & Fitness

    1 Answer

    Z8 is showing L5 cant seam to fix this


    Dear Sir:


    I will try to help you, please use the steps with patience and carefully: You must need some basics tools; Included Dvom (Digital Voltemeter).
    Instructions Things You'll Need for to Reset Code:

    • treadmill (all models applicable)

    1.

      • 1

    When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.

      • 2

    Press the "ENTER" button three times to access the treadmill's error log.

      • 3

    Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.

      • 4

    To view the treadmill

    Oct 19, 2011 | Spirit Fitness Z8 Treadmill

    2 Answers

    My tunturi T 20 gets error code E 7. it starts up, and after 5 or 10 seconds, it stops and flashed the error code. I have tried the recommended solution, which is to unplug the treadmill, wait a minute to...


    From time to time, error codes will pop up on your treadmill. It just takes a quick second to clear the error log and get the treadmill up and running again.
    1.When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.
    2.Press the "ENTER" button three times to access the treadmill's error log.
    3.Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.
    4.To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.
    5.To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.
    I hope you find it very helpful.

    Sep 04, 2011 | Exercise & Fitness

    2 Answers

    Error Code 02 on when swithced on REG. Can't cancel error. Shows E01 when swithced to X or Y


    Hi. Error codes are different between models. I need to know the brand and model number.

    Cheers,
    Mark

    Jul 29, 2008 | Casio Parts Cash Register PC Desktop

    Not finding what you are looking for?
    Exercise & Fitness Logo

    Related Topics:

    175 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Exercise & Fitness Experts

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    Sportsmith LLC
    Sportsmith LLC

    Level 3 Expert

    914 Answers

    Tom Chichester

    Level 3 Expert

    34066 Answers

    Are you an Exercise and Fitnes Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...