Question about Meiko Dishwashers

2 Answers

Water wont stop filling up

The washer wont stop filling up water

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 43 Answers

If water keeps filling in dishwasher, it could be pressure switch for tank or solenoid or even control module depend on circuit design,

Posted on Sep 23, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

If water keeps filling or dribbling into the machine with the power off it's the water inlet solenoid. If it overfills only during the cycle then it is the pressure switch or pressure switch tube.

Posted on Jul 10, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix amana w10240534c washer wont fill?


check your water inlet valve. Check it for continuity with a multi meter it should show Ohms or a closed circuit. To test it when water is overflowing unplug the unit and see if it still overflows or continues to fill. no fill If it stops when unplugged. Then it is not a water inlet problem but an electrical signal problem going to ur water inlet valve. Possibly from the panel or board.

May 31, 2014 | Amana 3.2 cu. ft. Top-Load Washer

2 Answers

Won't stop filling with water, seems to fill to top and keep filling


there is a water connector that the water lines from the house connect to the washer. you will need to take the panel off. you should see a blue plastic box where the hoses connect. you will need to replace this piece. it should have wires on it and that tells the washer when to open the valve for water to come through and when to stop.

Jan 27, 2011 | Frigidaire FWS833A Top Load Washer

1 Answer

Myn washer always overflowes as it filling it wont


This is usually the pressure switch. Also you could check the water inlet valve if water is still flowing in the machine after it stops. There are free videos on testing these components at www.appliancehelponline.com/servicemanual.html
You can also punch in your model # for diagrams

Mar 18, 2010 | GE Washing Machines

1 Answer

My GE washer wont stop filling in any cycle. Even if you pull out the plug. Leaks everywhere. I blew into water level switch hose and it clicks. Model number WBXR1060T. Thank you


If water continues to fill and you have unplugged the washer from the wall then your fill valve is stuck open and needs to be replaced. Turning off the water at the wall faucet should stop the water. The fill valve is what the hoses are attached to at the washer.

Feb 02, 2010 | Washing Machines

1 Answer

Washing machine wont hold water on any setting


raise the main drain hose to the top of the back control head. there may be a problem with the main hose being to low and the water is gravity siphoning out of the washer.make sure the washer is off when you lift the hose up but do not remove it from the wall,you should here water drain out once it has stopped draining restart you machine and it should fill to the proper level and quit then go into your wash cycle

Jan 31, 2010 | Whirlpool Inglis IP4400 Washer

1 Answer

Washer wont agitate or stop filling on any setting


Hello Friend, Just replace the water pressure/level switch. Replacement will make it fill correctly and agitate. Happy to help.

Nov 18, 2009 | Kenmore 24712 Top Load Washer

1 Answer

Washer wont stop filling even when its washing. GE


Replace water inlet valve, it's stuck open. You may try removing hoses to valve and see if something is holding it open

Jun 29, 2009 | Washing Machines

1 Answer

My washer wont stop filling up.cold and warm work but it doest know when to stop filling up hot doesn't work at all.please help my water bill was really high this month it a kenmore 80 series...


There is a defect or , malfunction within the Water fill level pressure switch. this switch will cost about 35 dollars and, it should be replaced asap.it has failed.

Replacing the
Water fill level pressure switch, will fix your issue.

Jun 16, 2009 | GE WBSR3140DW Top Load Washer

2 Answers

Washer stops after aggatating and wont drain


My Kenmore 70Series washer goes through the wash cycle then just stops when it is to drain and then spin.

Jun 10, 2009 | Whirlpool Washing Machines

2 Answers

Washing machine wont stop filling up


see if the water coming in is hot or cold by turning the water faucets off and on to see if one fills and the other dont and replace the valve

Feb 16, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Meiko Dishwashers Experts

jdthefixer

Level 3 Expert

744 Answers

ray gallant

Level 3 Expert

41519 Answers

Mister Danger

Level 3 Expert

5631 Answers

Are you a Meiko Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...