HDMI is a high bandwidth digital signal and you cannot cascade multiple HDMI Matrix units. It will degrade the video quality and you might run into EDID and HDCP issues. For further queries visit KVMSwitchTech or Call at 866-865-7737 (TOLL FREE).

Posted on Jul 11, 2013

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

The Motorola HD-DVRs are notorious for having problems when connected to a receiver. This is because your HD-DVR has anti-piracy code in it that sometimes detects your receiver as an unauthorized recording device and then will not allow anything to be sent to it for fear of piracy. But in your case, you are getting video and audio to your receiver without an error message.

You might have a faulty HDMI cable. If you can borrow one or have another one on hand try using a different one to see if anything improves.

If that doesn't do anything you might need to goto monoprice.com and buy one of their HDMI v1.3 switchers so you can run HDMI from your cable box and from your sound system receiver to the switcher, and then one HDMI cable to your HDTV. And then run a digital optical audio cable from your cable box to your receiver for audio.

The switchers aren't very expensive and should fix your problem (if it isn't a faulty HDMI cable). If the problem persists even with a switcher I'd say your HD-DVR is malfunctioning. And since you said your DVR sometimes is unaccessible, I'm leaning towards a bad HD-DVR as part of the problem.

To troubleshoot I'd try these steps (in order):

1) Try a different HDMI cable from your cable box to your receiver

2) Trade your HD-DVR into Comcast for a new one and see if the problem persists.

3) Buy the HDMI switcher from monoprice.com (make sure it is v1.3)

If all that fails, personally, I'd say you need someone to look at that!

You might have a faulty HDMI cable. If you can borrow one or have another one on hand try using a different one to see if anything improves.

If that doesn't do anything you might need to goto monoprice.com and buy one of their HDMI v1.3 switchers so you can run HDMI from your cable box and from your sound system receiver to the switcher, and then one HDMI cable to your HDTV. And then run a digital optical audio cable from your cable box to your receiver for audio.

The switchers aren't very expensive and should fix your problem (if it isn't a faulty HDMI cable). If the problem persists even with a switcher I'd say your HD-DVR is malfunctioning. And since you said your DVR sometimes is unaccessible, I'm leaning towards a bad HD-DVR as part of the problem.

To troubleshoot I'd try these steps (in order):

1) Try a different HDMI cable from your cable box to your receiver

2) Trade your HD-DVR into Comcast for a new one and see if the problem persists.

3) Buy the HDMI switcher from monoprice.com (make sure it is v1.3)

If all that fails, personally, I'd say you need someone to look at that!

Aug 13, 2014 | Cell Phones

is the splitter rated for 3d??

Nov 17, 2013 | Startech VS440HDMI 4x4 HDMI Matrix Video...

There are HDBaseT HDMI Matrix solutions for applications like yours. I would recommend to visit KVMSwitchTech as they offer a wide range of 4x4 HDMI Matrix and 8x8 HDMI Matrix solutions with HDBaseT support and zone remotes.

http://www.kvmswitchtech.com/8x8-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable-includes-8-hdbaset-receivers-p50030.htm

http://www.kvmswitchtech.com/8x8-cat5e67-hdmi-matrix-switch-with-hdbaset-over-single-cat5e67-cable-includes-8-hdbaset-receivers-p50030.htm

Apr 04, 2013 | Aten 4x4 HDMI Matrix Switch witch

The following was written for the Casio FX-991 ES. If matrix
calculations are available on your calculator you will perform them as
described below. ( I have no time to verify that the FX-991ms can
perform matrix calculations).

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matricies, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB

To subtract MatA-MatB

To multiply MatAxMatB

To raise a matrixe to a power 2 [x2], cube [x3]

To obtain inverse of MatA already defined MatA[x-1] [x-1] is the x to the power -1 key

Dimensions of matrices involved in operations must match.

Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular umbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An**mXn **matrix has** m rows **and**
n columns**. To perform multiplication of an **kXl** matrice by
an **mXn** matrix you multiply each element in one row of the first
matrix by a specific element in a column of the second matrix. This
imposes a condition, namely that the number of columns of the first
matrix be equal to the number of rows of the second.

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So**
MatA(kXl) * MatB(mXn) is possible only if l=m**

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.** If this condition is not satisfied, the calculator
returns a dimension error**. The order of the matrices in the
multiplication is, shall we say, vital.

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matricies, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB

To subtract MatA-MatB

To multiply MatAxMatB

To raise a matrixe to a power 2 [x2], cube [x3]

To obtain inverse of MatA already defined MatA[x-1] [x-1] is the x to the power -1 key

Dimensions of matrices involved in operations must match.

Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular umbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.

Nov 07, 2012 | Casio FX991MS Scientific Calculator

This
post is rather exhaustive as regards the matrix capabilities of the
calculator. So if the post recalls things you already know, please skip
them. Matrix multiplication is at the end.

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matrices, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB (MUST have identical dimensions same m and same n, m and n do not have to be the same)

To subtract MatA-MatB. (MUST have identical dimensions, see above)

To multiply MatAxMatB (See below for conditions on dimensions)

To raise a matrix to a power 2 [x2], cube [x3]

To obtain inverse of a SQUARE MatA already defined MatA[x-1]. The key [x-1] is the x to the power -1 key. If the determinant of a matrix is zero, the matrix is singular and its inverse does not exit.

Dimensions of matrices involved in operations must match. Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular numbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An**mXn **matrix has** m rows **and**
n columns**. To perform multiplication of an **kXl** matrix by
an **mXn** matrix you multiply each element in one row of the first
matrix by a specific element in a column of the second matrix. This
imposes a condition, namely that the number of columns of the first
matrix be equal to the number of rows of the second.

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So**
MatA(kXl) * MatB(mXn) is possible only if l=m**

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.** If this condition is not satisfied, the calculator
returns a dimension error**. The order of the matrices in the
multiplication is, shall we say, vital.

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matrices, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB (MUST have identical dimensions same m and same n, m and n do not have to be the same)

To subtract MatA-MatB. (MUST have identical dimensions, see above)

To multiply MatAxMatB (See below for conditions on dimensions)

To raise a matrix to a power 2 [x2], cube [x3]

To obtain inverse of a SQUARE MatA already defined MatA[x-1]. The key [x-1] is the x to the power -1 key. If the determinant of a matrix is zero, the matrix is singular and its inverse does not exit.

Dimensions of matrices involved in operations must match. Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular numbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.

Apr 24, 2011 | Casio FX-115ES Scientific Calculator

This
post is rather exhaustive as regards the matrix capabilities of the
calculator. So if the post recalls things you already know, please skip
them. Matrix multiplication is at the end.

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matrices, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB (MUST have identical dimensions same m and same n, m and n do not have to be the same)

To subtract MatA-MatB. (MUST have identical dimensions, see above)

To multiply MatAxMatB (See below for conditions on dimensions)

To raise a matrix to a power 2 [x2], cube [x3]

To obtain inverse of a SQUARE MatA already defined MatA[x-1]. The key [x-1] is the x to the power -1 key. If the determinant of a matrix is zero, the matrix is singular and its inverse does not exit.

Dimensions of matrices involved in operations must match. Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular numbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An**mXn **matrix has** m rows **and**
n columns**. To perform multiplication of an **kXl** matrix by
an **mXn** matrix you multiply each element in one row of the first
matrix by a specific element in a column of the second matrix. This
imposes a condition, namely that the number of columns of the first
matrix be equal to the number of rows of the second.

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So**
MatA(kXl) * MatB(mXn) is possible only if l=m**

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.** If this condition is not satisfied, the calculator
returns a dimension error**. The order of the matrices in the
multiplication is, shall we say, vital.

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matrices, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB (MUST have identical dimensions same m and same n, m and n do not have to be the same)

To subtract MatA-MatB. (MUST have identical dimensions, see above)

To multiply MatAxMatB (See below for conditions on dimensions)

To raise a matrix to a power 2 [x2], cube [x3]

To obtain inverse of a SQUARE MatA already defined MatA[x-1]. The key [x-1] is the x to the power -1 key. If the determinant of a matrix is zero, the matrix is singular and its inverse does not exit.

Dimensions of matrices involved in operations must match. Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular numbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.

Jan 09, 2011 | Casio FX-115ES Scientific Calculator

This post is rather exhaustive as regards the matrix capabilities of the calculator. So if the post recalls things you already know, please skip them. Matrix multiplication is at the end.

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matrices, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB (MUST have identical dimensions same m and same n, m and n do not have to be the same)

To subtract MatA-MatB. (MUST have identical dimensions, see above)

To multiply MatAxMatB (See below for conditions on dimensions)

To raise a matrix to a power 2 [x2], cube [x3]

To obtain inverse of a SQUARE MatA already defined MatA[x-1]. The key [x-1] is the x to the power -1 key. If the determinant of a matrix is zero, the matrix is singular and its inverse does not exit.

Dimensions of matrices involved in operations must match. Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular numbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An**mXn **matrix has** m rows **and**
n columns**. To perform multiplication of an **kXl** matrix by
an **mXn** matrix you multiply each element in one row of the first
matrix by a specific element in a column of the second matrix. This
imposes a condition, namely that the number of columns of the first
matrix be equal to the number of rows of the second.

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So**
MatA(kXl) * MatB(mXn) is possible only if l=m**

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.** If this condition is not satisfied, the calculator
returns a dimension error**. The order of the matrices in the
multiplication is, shall we say, vital.

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matrices, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB (MUST have identical dimensions same m and same n, m and n do not have to be the same)

To subtract MatA-MatB. (MUST have identical dimensions, see above)

To multiply MatAxMatB (See below for conditions on dimensions)

To raise a matrix to a power 2 [x2], cube [x3]

To obtain inverse of a SQUARE MatA already defined MatA[x-1]. The key [x-1] is the x to the power -1 key. If the determinant of a matrix is zero, the matrix is singular and its inverse does not exit.

Dimensions of matrices involved in operations must match. Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular numbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.

Dec 18, 2010 | Casio FX-115ES Scientific Calculator

The other jacks on the cable box are probably video out for a DVR or DVD/VCR recorder. If you do not have multiple ports, you need some sort of switch or port multiplier. Without knowing the type of cables/ports you are using, I'm not sure which one you need. There are HDMI switches (reviews of some are here: http://reviews.cnet.com/4321-7871_7-6602831.html) if you have to share an HDMI port. Many use remotes to let you select which input is the current one going to the TV.

Similarly there are Component video switchers as well. A few models are here: http://www.hometech.com/hts/products/video/selectors/component/ .

Often you can find these locally as well.

I hope this helps.

Cindy Wells

Similarly there are Component video switchers as well. A few models are here: http://www.hometech.com/hts/products/video/selectors/component/ .

Often you can find these locally as well.

I hope this helps.

Cindy Wells

Aug 18, 2010 | Televison & Video

Let me explain how to create matrices. (If you know how to do it, skip to the operations on matricies, at the end.)

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB

To subtract MatA-MatB

To multiply MatAxMatB

To raise a matrixe to a power 2 [x2], cube [x3]

To obtain inverse of MatA already defined MatA[x-1] [x-1] is the x to the power -1 key

Dimensions of matrices involved in operations must match.

Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular umbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An**mXn **matrix has** m rows **and**
n columns**. To perform multiplication of an **kXl** matrice by
an **mXn** matrix you multiply each element in one row of the first
matrix by a specific element in a column of the second matrix. This
imposes a condition, namely that the number of columns of the first
matrix be equal to the number of rows of the second.

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So**
MatA(kXl) * MatB(mXn) is possible only if l=m**

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.** If this condition is not satisfied, the calculator
returns a dimension error**. The order of the matrices in the
multiplication is, shall we say, vital.

First you must set Matrix calculation

[MODE][6:Matrix]. Then By entering one of the numbers [1:MatA] or [2:Matb] or [3:MatC] you get to choose the dimensions of the matrix

(mxn]. Once finished entering the matrix you clear the screen.

The operations on matrices are available by pressing [Shift][Matrix]

[1:Dim] to change the dimension of a matrix (in fact redefining the matrix)

[2:Data] enter values in a matrix

[3:MatA] access Matrix A

[4:Matb] access Matrix B

[5:MatC] access matrix C

[6:MatAns] access the Answer Matrix (the last matrix calculated)

[7:det] Calculate the determinant of a matrix already defined

[8:Trn] The transpose of a matrix already defined

To add matrices MatA+MatB

To subtract MatA-MatB

To multiply MatAxMatB

To raise a matrixe to a power 2 [x2], cube [x3]

To obtain inverse of MatA already defined MatA[x-1] [x-1] is the x to the power -1 key

Dimensions of matrices involved in operations must match.

Here is a short summary

The multiplication of structured mathematical entities (vectors, complex numbers, matrices, etc.) is different from the multiplication of unstructured (scalar) mathematical entities (regular umbers). As you well know matrix multiplication is not commutative> This has to do with the dimensions.

An

Thus, to be able to multiply a kXl matrix by am mXn matrix, the number of columns of the first (l) must be equal to the number of rows of the second (m).

So

MatA(kX3) * Mat(3Xn) is possible and meaningful, but

Mat(kX3) * Mat(nX3) may not be possible.

To get back to your calculation, make sure that the number of columns of the first matrix is equal to the number of rows of the second.

Mar 06, 2010 | Casio FX-115ES Scientific Calculator

try turning off HDMI Audio Out.

Jul 10, 2009 | Onkyo TX-SR875 Receiver

93 people viewed this question

Usually answered in minutes!

×