Question about Watches
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Instructions for Sharp Alarm Chrono (Digital)
Push "Mode" button until the mode is shown that you want to reset, do this even if the mode you want to reset is all ready showing.
Push "Reset", continue pushes until the desired Parameter (Minute, Hour, or Second) is flashing.
Use "Start" button to advance the digits to the desired setting.
Push "Mode" Button to finish.
Posted on Mar 05, 2008
SOURCE: Sector 250 Chronograph Alarm
the middle dial on the right side of the watch is used to switch from watch settings to alarm settings..
pull the middle dial out to put it in alarm mode.
To set alarm:
-pull the center knob out.
-with it out you can now use the bottom (right) knob to set the alarm.
-pull the bottom right knob out one notch
-turn the knob clockwise or counter clockwise to set the alarm time
-push the knob back in (all the way)
the alarm is now set
if the center (right) knob is pulled out the alarm is ON
if the center (right) knob is pushed in the alarm is OFF
I have owned this watch for about 10 years now and love it.
the past few years the chronograph buttons (on the left side of the watch) were not working well rendering the chronograph and count down timer functions unusable.
repairing a chronographs is expensive and watch makers usually charge several hundred dollars which is not a feasible fee for a watch of this value so i decided to open it up my self and clean it up and that did the trick.. its working like new!
enjoy the watch!
Posted on Jan 09, 2009
There are so many aplications use of the manual will be manditory.
Use the numbers on the back of your watch and you will have a PDF version of your instruction manual.
Hope this tip helps
Posted on Mar 24, 2010
pull the crown out 2 clicks....
set the alarm the same as your current time on your watch.....
push the crown in 2 clicks.....
than pull the crown out 1 click .....
set the alarm at the desired time with the lower button.....
than push the crown in 1 click ....
the alarm is ON
or go to this address http://caliber.seikowatches.com/ select the desired language than - alarm chronograph and play the alarm option on your right
Posted on May 19, 2010
Tips for a great answer:
Aug 23, 2010 | Pulsar 100 Meter Alarm Chronograph PF3277
May 17, 2010 | Seiko Coutura Chronograph Watch
May 19, 2010 | Watches
May 14, 2010 | Watches
Jan 25, 2010 | Seiko Coutura Chronograph Watch
Jan 15, 2010 | Watches
Mar 29, 2009 | Timex T42351 watch
Dec 11, 2008 | Sector 2653940025 Wrist Watch
Aug 12, 2008 | Pulsar Watches
Jul 16, 2018 | The Watches
314 people viewed this question
Usually answered in minutes!