Question about Office Equipment & Supplies

Open Question

Reset canon MG5440 chip on ink cartridges - Office Equipment & Supplies

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: canon mp600 printer

MP600 Easy fix for unrecognized ink cartridge

Posted on Jul 18, 2008

  • 1 Answer

SOURCE: Canon MP520 cartridge swap and ink refill

Canon MP520 multifunctional device - deactivation of the ink level counter
1. You can do it only when the printer counter releases the warning message - "the ink cartridge is nearly empty" = yellow warning mark

7b49096.jpg


2. You have to do this procedure four times - for every cartridge one times
3. At the screen you will see three warning messages
- for the first one press "OK"
- for the second and third one press "Yes"
4. The fourth message tells you that you can do the ink level counter deactivation by pressing the "Stop/Reset" button (7) for more than 5 seconds. Do it.


Later you can see another type of warning message at the screen:
eac72ff.jpg

In this case you can not follow the previous procedure - there will not be any other warning messages.
Just follow the message on the screen and press the "OK" button (5) and you can print.
Unfortunately - I do not know for how long time it works.
71df964.jpg

You have to manualy check the ink level and refill (change) the cartridge before it is completely empty! You might brake your warranty!
When you insert the new original ink cartridge, the counter will work properly again.








Posted on Sep 14, 2008

  • 295 Answers

SOURCE: reset chip kodak esp 7 ink cartridge

Kodak printer works with genuine Kodak cartridges and that too brand new not refilled cartridges. The brand new cartridges have a certain code that is recognised by the Printer.Kindly buy genuine cartridges as the printer may be damaged by Non comaptible cartridges.

Posted on Sep 21, 2009

  • 191 Answers

SOURCE: Reset Canon printer chip

you can override ink check status and manually reset it in drivers options

Posted on Sep 22, 2009

Grubhead
  • 5020 Answers

SOURCE: Do I have to reset chip on the Canon Pixma MX860

If you can yes!

Posted on Feb 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset ink level after top off of ink? canon MG3500 series


You cannot refill ink cartridges anymore. There is a computer chip in the ink cartridge and when it goes empty, it stays empty forever. The printer companies were losing money when you refilled the ink yourself, so they installed a computer chip to stop customers from doing it.

Nov 08, 2015 | Canon Office Equipment & Supplies

1 Answer

Reset ink level on canon mg2120 after ink refill


The following procedures may be used to reset the Canon printer ink level monitoring following the installation of a refilled Canon 30, 31, 40, 41, 50, 51, 210, 211, 240, or 241 integrated ink cartridges. In most cases, the error/alert will need to be cleared to enable printing. Ink waste container reset procedures are also provided below.
NOTE: for multi-cartridge installation, the procedure(s) may need to be repeated twice.

For PGI-5, PGI-9PBK, CLI-8, PGI-220 CLI-221 PGI-225 CLI-226 PGI-250 CLI-251 Cartridges: These are new Canon cartridges which have an embedded chip on each cartridge. If you just refill the ink, the printer will still reads the cartridge as empty. You have two choices:

Purchase a "refillable cartridge" from www.asapinkjets.com
BCH or other sellers. These refillable cartridges have an auto-reset chip (non OEM) and will reset automatically.
Use a chip resetter (e.g., search Canon + model number + resetter on eBay). Follow the instruction below to refill your original cartridge, and use the resetter to reset the chip.
Inkjet Cartridges and Toner Refills

Aug 29, 2012 | Canon PIXMA MG2120 Inkjet Photo All-In-One

1 Answer

How to reset printer canon 8180


1.Attain an ink cartridge chip resetting device from a computer electronics retail store or an online retailer. These portable devices resets the cartridge chip so your printer recognizes the cartridge as being full.

2.Remove the cartridge from the printer by opening the top tray and taking the cartridge out of the carrier holder.

3.Line up the pins on the resetting device and the chip on the ink cartridge, then connect them together, making sure the connection is firm.

4.Hold the resetting device and ink cartridge chip in place, for about 10 seconds, until the LED light on the device turns green. This means the cartridge was successfully reset. Afterward, remove the device from the cartridge.

5.Place the cartridge back in the printer's ink cartridge carrier holder and print a test page.

Dec 18, 2010 | Canon imageCLASS MF8450c Color Laser...

1 Answer

Reset Canon printer chip


you can override ink check status and manually reset it in drivers options

Sep 22, 2009 | Canon PIXMA iX4000 InkJet Photo Printer

2 Answers

When refilling canon ip4500 cartridge they still show empty


I'm sorry you got that STUPID answer first. The Canon cartridges you use have a chip or small circuit board on the bottom front. You have to either reset that chip or get the reset chips from the place you get your ink. That little chip tells your printer how much ink has been used and once they are empty refilling doesn't help without a new or reset chip.

Jul 18, 2009 | Canon Pixma iP4500 InkJet Printer

1 Answer

Refilled ink cartridges on canon pixma ip4300. Need to reset ink


You can try www.lasertechgroup.com their cartridges come with the chip and are more reasonably priced than the Canon originals. I've seen chip resetters in the shops but not yey one for this printer.

Dec 28, 2008 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Canon mp160 empty cartridges


THERE IS NO WAY TO RESET THE CARTRIDGES"S CHIP SET TRY IGNORE IT.

Nov 21, 2007 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Canon ink cartridges reset chip


Have not found a chip reset device, but there is this German device selling on ebay which seems to disable the whole chip mess. Do a Google search for this: CANON-PIXMA-CHIP-REVOLUTION. They have sold a lot of these and many people seem happy, but some people are not thrilled with it. I haven't tried it.

Nov 12, 2007 | Canon PIXMA iP4000 InkJet Photo Printer

3 Answers

Waste ink full


This step is a "reset" step for the Canon CLI8 cartridges. The original Canon CLI8 cartridges have a memory chip on the back of the cartridge, which sends a signal to the printer when the cartridge is empty. Your printer won't be able to determine how much ink is in the compatible cartridges, but you can easily monitor the ink level by noticing the ink level drop in the cartridge as you print (the cartridges are see-through), or by noticing low ink output on the printed pages when you run out of ink. The "reset" procedure below is the best procedure we know of to date to allow your printer to use Uni-Kit cartridges which offer a tremendous savings over the Original Canon products.

With the original chip now attached to the compatible cartridge (you may need double sided tape to get the chip to stick well to the cartridge), and with the cartridge now in the printer, Press and hold the Reset/OK Button for 5 seconds to reset the chips.

  1. The "Ink Low" dialog box will pop up (similar to photo 1 below)
  2. Continue to print until the "ink has run out" dialog box pops up (similar to photo 2 Below) Click "OK" to continue to print.
  3. The "Ink Low" dialog box may reappear, if so repeat the first 2 steps
  4. Then the "once empty" dialog box will pop up (similar to photo 3 Below) Click "Yes" to continue to print
  5. The "Not Liable" dialog box will pop up (similar to photo 4 below). Click "Yes" to continue to print
  6. Continue to print until the "remaining level of ink" dialog box pops up (similar to photo 5 Below) Click "OK" to continue to print
  7. Another dialog box will pop up with the "press and hold the Resume" or "press and hold the Paper Feed" button (similar to photo 6). Press and hold the "STOP/RESET" button (for Canon MP Series) or "PAPER FEED" button (for Canon IP Series) for 5 seconds. DO NOT Click "Back" or "Cancel Printing"
  8. The "Ink Monitor" dialog box will appear and the printer will continue to print. (similar to photo 7) In the event that that the "press and hold the Resume " dialog box pops up again, Press and hold the Paper Feed Button or Stop/Reset Button for 5 seconds

Oct 31, 2007 | Canon PIXMA iP3300 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...