Question about Saws
TABLE SAW MODEL: 137.248830 ARMATURE MODEL: 0R1Y
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you need to grab the blade with something.maybe some pliers(if you are not going to refurbish blade) and loosen the nut in the center of the blade. i think it is a left hand thread(cw to loosen) because of the rotation of the blade. if the nut is on the left when looking from the front it is probably left handed. make sure it's unplugged and wear leather gloves so you don't get cut. install in reverse...
Posted on Jan 20, 2009
I'd need the model number, or more info to point you more closely, but take a look at this site and see if you can't sort it out:
If that works for you, please let us know. If not, provide a little more detail and I'll see what I can do.
Posted on Mar 26, 2009
SOURCE: Bosch 4000 table saw disassembly
turn the motor housing slightly until you can put a screwdriver between the housing and diaphragm, pull on the one side and push with the driver and it will come apart, I just did one yesterday. To get the armature out of the fan bearing you will need a dead blow hammer to tap on the diaphragm while pulling on the armature. The bearing is held in place with 2 screws, hope this helps.
Posted on Aug 18, 2009
Testimonial: "Hey thanks! It seems they really don't want you to work on the motor on this particular saw. Thanks again for your help. "
SOURCE: replacement motor for table saw
I would suggest taking the motor to a Grainger or equivelant type of business and they can probably match it up with a Dayton motor that would replace this one. They will need all the information off the data tag to match it up.
Posted on Nov 15, 2009
Tips for a great answer:
Mar 14, 2017 | Saws
Feb 13, 2012 | Skil 10" Table Saw
Apr 16, 2011 | Craftsman 10" Table Saw
Nov 04, 2010 | Craftsman 10" Table Saw
Aug 06, 2010 | Craftsman 10" Table Saw
Feb 06, 2010 | Craftsman 10" Table Saw
Feb 04, 2010 | Craftsman 10" Table Saw
Sep 28, 2009 | Craftsman 10" Table Saw
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: