Question about Heating & Cooling

Open Question


Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 100 Answers

SOURCE: Makes a loud humming sound and blows fuse behind controll panel

Most likely a shorted capacitor is causing the fuse to blow. Easy and cheap to fix.
Check with or call toll free 1-877-894-0035 for parts info

Posted on Sep 06, 2008

  • 2 Answers

SOURCE: thermador oven control panel light is not working

Please see post by bonanzsapilot on 14 March 2009; he gives exact & easy to follow directions for making this repair for <$10. It's listed uner 'Thermador SC301IT oven - FixYa'. In a separate post I added the correct capacitor numbers from I made the fix in abt 30 min & it's good as new. Thermador no longer makes control panels for this oven & no wiring diagram is available to help. Shop price was estimated at $500.

Posted on Apr 13, 2009

  • 1 Answer

SOURCE: Operating with/without the control panel

Posted on Jun 02, 2009

  • 8220 Answers

SOURCE: My Danby DWC512BL has stopped cooling. The

moz-screenshot-22.pngmoz-screenshot-26.pngReplace that fan

Posted on Oct 06, 2009

  • 3085 Answers

SOURCE: several features on my control panel have stopped

Not good, a new Touch Pad will cost as much as a new microwave oven.

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Dehumidifier danby DDR 501

do the panel indicators light up? is the tank full? is the tank properly seated in position..check the tank switch for operation..

Aug 03, 2014 | Danby Dehumidifiers

1 Answer

We had a lightning strike near our home and our Ewave OTR microwave quit, nothing works but the light inside and the vent fan comes on automatically. We've been told that there is a fuse that can be...

If the light and fan work then it cannot be the fuse. When the fuse "blows", it stops the electricity totally from flowing into the microwave and nothing will work or respond. The fuse is behind the control panel and this requires several hidden screws to be removed. Also, you must be very careful of the 2000 volt charge that is stored in the wiring further into the compartment behind the control panel. Therefore, do not attempt to open the micro control panel without proper service knowledge.
Because you say the light and fan operate, the fuse (as I stated ) is not your answer; most likely the problem is in the control panel circuit board. The circuit board is like any sensitive electronic component that goes crazy when there is a voltage surge that strikes it such as lighting throughout the house wiring. The board needs to be replaced unless you can have an electronic wizz-kid test is out and repair it , or just by a new board. By the way, the board is not cheap and may be difficult to locate since I understand the the manufacture stopped producing it.

Aug 13, 2009 | Microwave Ovens

1 Answer

Danby DMW753W ; machine starts without any command

The membrane of the touch control is shorted and must be replaced.

Mar 27, 2017 | Danby DMW773 Microwave Oven

2 Answers

Danby DDW399W Power Light does not work

Open the door and after you've disconnected the power supply ,remove all of the screws that hold the inside door liner to your door.They are usually T-15 or T-20 heads. This will give you access you ask about. Please Rate This !

Jul 07, 2008 | Danby 22 in. DDW396 Free-standing...

1 Answer

Danby model DPAC10061

I can't find my manuel and when turning on my a/c it will not allow me to set the controls to slow, fast, fan, even when pushing the rset button the complete panel lights up and any of the buttons I oush will not respond. Can you help me.
thanks Debra

Jul 04, 2007 | Danby DPAC8020 Air Conditioner

1 Answer

A/c will not work

Sounds like the control electronics are faulty. Replace control unit.

Jun 03, 2007 | Danby DAC9003D Air Conditioner

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

2550 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides