Question about Hampton Bay Dryers
I just finished installing the ceiling fan and upon testing it discovered that the lights work but the fan wil not turn on. Could this be a wiring problem or a motor problem? The model number is750 809
Could be either or if you installed it yourself I would recheck the wiring.................If that is correct it could be the motor..........
another thing I have seen sometimes is the pull switch doesn't reset, you can try pushing the pull chain inwards and see if you hear a click, if you do, then the switch isn't resetting after its been pulled. I have that problem with 2 ceiling fans myself, and all I gotta do is just push the chain inward and reset the switch.
Do it with the power off, if you want to try, just to be safe, if you hear the click, the pull the chain again and listen for a click, then turn the power on. If that works than it is the switch. If not then it is either the wiring or the motor.
If unsure contact a electrician or a trusted handyman
Posted on Jul 09, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need two switches. It sounds like the Electrician set up the junction box for two circuits(Lights and Fans). i say this because your supply has 4 wires, Red , Black, White and Bare. We may be able to oversome this with one Lutron Switch. Allow me to investigate, and I will be back.
Posted on Oct 29, 2007
If you don't want the to use the remote you don't have to, but you don't have enough wires to switch the upper light, the lower light, and the fan. You can, however, switch the upper and lower lights together if that's okay. In order to do that you'd connect the white from the ceiling box to the white (neutral) on the fan, then the green from the ceiling box to any green(ground) wires on the fan, then the black from the ceiling box to the black(motor) from the fan, then the red from the ceiling box to the blue and orange (lights) from the fan. I'm assuming that the black and red in the ceiling box are also in the switch box where the fan/light control switch is going. Those are the ones you'll connect to the controller.
Posted on Jan 27, 2009
I had the exact same problem. To solve it, I had a friend hold the area
of the fan that the globe screws into. I wore rubber dish gloves to get
a good grip and pushed up slightly on the globe as I turned
counter-clockwise. My friend held the other part and turned clockwise a
little as well. It took a lot of pressure for it to finally come loose
and then we just turned it about another 90 degrees and the globe slips
right out of the groove.
I couldn't believe how hard this was to do.
Posted on Feb 14, 2009
Tips for a great answer:
Feb 01, 2016 | Dryers
Jun 03, 2015 | Hunter 21894 Westover Four Seasons 52-inch...
Mar 25, 2010 | Hampton Bay AC414-LRU 52'' Kemper...
Jan 03, 2010 | Hunter Ceiling Fan Control Switch
Sep 18, 2009 | Hampton Bay 52 In.Carriage House II in...
Aug 16, 2009 | Hunter 28156 Cote 54' d'Azur® Ceiling Fan
Jul 21, 2009 | Hunter Ceiling Fan Control Switch
Mar 14, 2009 | Hampton Bay 52 In.Carriage House II in...
Nov 10, 2008 | Hampton Bay AC414-LRU 52'' Kemper...
103 people viewed this question
Usually answered in minutes!