Question about Heating & Cooling
Remote control for a/c fujitsu inverter
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fujitsu air cons are factory set at 18degs you cannot change it without going through all the controller programs. Normally air cons are serpose to run around the 20deg point, is the air con not running effectually or do you just really like it cold.
I could check with tech help and see if I can send you the derictions of changing the minimum set point but it will not be good in the long run for your unit
Posted on Jan 08, 2009
If your remote control have display but cannot transmit signal to the unit. Confirm first if the remote is really the problem, using your camera or cellphone camera as your eyes point the remote transmitter to your camera and "on" the remote. You should see light emits in your remote control, if no emitted light then the remote control is defective. But if there is a light the defect is in the unit receiver.
Check also if there is a reset or rst button in your remote control and reset it and try.
Check also if there are error codes in the unit, reset the unit by disconnecting the power supply in the unit for 10 sec. and "on" again and try.
The unit can be operate without remote control, use the manual button located in the unit.
If the remote control have no display replacement of remote is recommended.
Posted on Jan 16, 2009
If you contact Fujitsu in your country and you will be able to buy it straight from them, if they are still available. Now I have to warn you as a Fujitsu warrenty agent they are very very expensive.
I would prolly recommend getting a universal remote. ALOT cheaper
Posted on Jan 23, 2009
open the remote and carefully look at where the batteries make contact they sometimes bend in and dont make contact just pry them out a little and reinsert batteries and it often will work again
Posted on Jul 07, 2009
Tips for a great answer:
Apr 21, 2018 | Fujitsu Heating & Cooling
Oct 15, 2016 | Fujitsu Heating & Cooling
May 22, 2014 | Televison & Video
Nov 26, 2013 | Heating & Cooling
Oct 29, 2013 | Fujitsu Televison & Video
Apr 08, 2011 | Fujitsu Heating & Cooling
Jan 31, 2010 | RCA 3-Device Universal Remote with...
Jun 25, 2008 | Fujitsu FPCRC05 Remote Control
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: