Question about Kenmore 24 in. 16259 / 16254 / 16252 Built-in Dishwasher

1 Answer

Kenmore dishwasher model 63991 (10yrs old)

Just loaded my dishwasher and pushed Start and nothing happened. All the lights are working on the control panal, even the counter works as if the dishwasher was running. It finished the last run and left a little pool of water on the bottom. We had a repair man (kid) in and he said we need a new circuit board, not sure if we trust his answer. Does it sound like we need a new circuit board. We've never had any problems with this dishwasher in the 10 years we've had it. Thanks so much for your help Kelly

Posted by on

  • Anonymous Nov 06, 2007

    same

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 131 Answers

If the display works, but the machine doesn't fill, wash, or pump out, the control board is the only component that could cause all these symptoms.

Posted on Mar 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore dishwasher will not start


The most probable cause is the door latch (or switches in the latch) are not working right, and the controller thinks the door is open, even though it is closed.

Aug 13, 2012 | Kenmore Dishwashers

2 Answers

Dishwasher not responding


we have a 4 yr. old built in dishwasher,model #665-15812,the lock-on light is blinking,and the wash and rinse lights are on,but if we push start ,it won't,and if we push the clear button,it won't clear,it's like it's stuck ....we've tried un-plugging,etc....any ideas,on what to do??? donnie-sue79

May 13, 2009 | Kenmore 15939 Built-in Dishwasher

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

2 Answers

Maytag dishwasher, no power, then flashing lights, now no power.


Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Jeff

Dec 23, 2008 | Maytag MDB7100AWB Dishwasher

1 Answer

Kenmore Model 587 -- Will not run - Power lights come on/wontrun


Hello I am V- Mari and i own a Kenmore dishwasher model Number 587.1574590 and it doesn't work at all. The power light comes on and it seems to make noise, but it does nothing. Is there a recall for these models or free fix help please respond to miss_vmari@netzero.net. I would like to solve my dishwasher problems as soon as possible. Thank you!

Dec 12, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

2 Answers

Kenmore model 665.15912001dishwasher


The controller board is burned out...common problem on this model. Only way to fix is to replace with a new one. Cost of part is about $130.

Apr 17, 2008 | Kenmore 24 in. 17482 / 17484 / 17489...

1 Answer

Kenmore 44102 won't start


when you push start button it beeps 3 times door switch is bad what model you have can make difference give me the model no

Feb 27, 2008 | Kenmore 44102 Front Load Washer

1 Answer

Diswasher stopped working


there is a fuse in the washer that needs to be replaced reply to me and will walk you through it

Dec 31, 2007 | KitchenAid 24 in. KUDI01FLSS Stainless...

2 Answers

Kenmore front load washer won't start. Lights just blink


I had same problem........push options and select button at same time, hold for 5 sec.......choose option.....machine stuck inbetween cycles.

at least it worked for me!

Dec 26, 2007 | Washing Machines

Not finding what you are looking for?
Kenmore 24 in. 16259 / 16254 / 16252 Built-in Dishwasher Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

vince

Level 3 Expert

1211 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...