Question about Encore ENUWI-G2 802.11G WIRELESS USB 2.0 ADAPTER (54 MBPS)

2 Answers

My device is no loner recognized

Hi! Everything was functioning fine for several months,then all of a sudden, my conecction was lost, my system do not recognize the USB device.I change USB sloths,check the cables, applied another USB pen drives instead of my non-functioning wireless USB device,I plugged another USB device in case this one was damaged; I desinstalled and reinstalled the device and software;I even went back to a earlier restoration point.It is driving me crazy,the computer tells telling me that it does not recognized the devuce.Hope somene be abkle to hel p me. Thank you for your eventual advice

Posted by on

  • AlexisM Aug 28, 2007

    Thanks! But the device is OK, when I put it in my pthet computer it works fine, but neither of the two adapters works well in THAT computer!!!!
    ??????

  • AlexisM Aug 28, 2007

    I used a tip from another site, namely to erase at the device adminsitration panel the host controler PCI to USB, and it worked, but when I shutted down the computer and it reinitiated the next day I was back at the beginning!!!!
    I am afraid to buy complete new equipment, new router, etc,. and have the same problem at short time....
    Any further advice will be very welll received!!!!

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have an external hard drive with films which in use this computer to viewbut now the computer does not not recognise it.

Posted on Apr 09, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers

Go into the device manager, click on View > Show hidden devices. Look under unknown devices or under USB for unknown devices. Also check under the section relating to the type of usb device. If you find an Unknown Device, or a device with an exclamation point, right click on it and uninstall. Disconnect the device, reboot and install the drivers/software for it if any. If it's still not working check it in another computer. If you cannot get it to work in either machine, the usb plug of the device is probably damaged. Possibly a loose solder joint. Have the manufacturer send you a new one if its still under warranty.

Posted on Aug 26, 2007

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 59 Answers

SOURCE: My USB device is no longer recognized

Seen this happen many times...it stems from a corruption of the plug and play drivers enumeration key in the registry...the fix is quite elusive...the key is cheap...pick a different brand to replace it with save yourself the grief of fighting this battle. Hope that helps.

Posted on Aug 27, 2007

  • 59 Answers

SOURCE: Mi USB device is no longe recognized

Well the fact that it says it can't load the device but sees it, is a pretty good sign actually...first off check the drivers for the device... good luck

Posted on Aug 28, 2007

SOURCE: My USB wireless device is no longer recognized

Hi, I have seen this type of thing B4, & it sounds to me as if your USB WiFi has gone faulty? Really the ONLY way to check is to try another USB WiFi unit.

Posted on Sep 04, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

External HD not recognizing USB ports as being Hi-speed ports


I have the same issue. I have 4 Simpletech Signature 250GB drives. They all worked fine at first. After about six months two of them started connecting at USB 1 speeds. It occurs on 4 different computers!!! The post about it being the computer assumes is wrong. How can it work fine for six months and then suddenly change. Also it occurs on different computers. I have submitted a tech support request with simpletech and will post the results.

Jun 14, 2009 | SimpleTech Signature Mini 160GB External...

1 Answer

Canon MP240


Have a look at this link
http://windowsfixup.com/2009/03/usb-device-not-recognized-fixes/

"Delete the INFCACHE" has worked for me in the past.

Also I found that I was using a non USB 2.0 cable which caused the "unrecognized USB" problem. Once I used a proper USB 2.0 cable it was fine.

Hope that helps.

May 11, 2009 | Office Equipment & Supplies

1 Answer

I have an IMODE IP215 that has lost sound. Any suggestions


Hi,

i am in Colombia, and year ago i bought in USA at Circuitcity (Miami) an Imode Ip 215 Clock Radio with IPOD dock station for a nephew gift. It functions several months without any problem but suddenly it does not sound anymore. A technician examination determined that the problem was not the volume control as i though but the CD8227CP Integrated . The Headphone jack always worked fine in spite of that problem, though the volume was fixed..
Idon't know if this common problem of the Imode devices mut be due to a defective or bad quality sound piece

I hope this help you to determine thereal problem.

my mail: Dave2006D@yahoo.com.

Dec 18, 2008 | Audio Players & Recorders

1 Answer

Light turns on but My Computer does not recognize the drive


The problem is just with EXTERNAL.
Hdd is fine...Just change the external or buy new

Nov 18, 2007 | Maxtor OneTouch III Mini Edition 120GB...

1 Answer

My USB device is no longer recognized


Seen this happen many times...it stems from a corruption of the plug and play drivers enumeration key in the registry...the fix is quite elusive...the key is cheap...pick a different brand to replace it with save yourself the grief of fighting this battle. Hope that helps.

Aug 25, 2007 | Encore ENUWI-G2 802.11G WIRELESS USB 2.0...

1 Answer

Mi USB device is no longe recognized


Well the fact that it says it can't load the device but sees it, is a pretty good sign actually...first off check the drivers for the device... good luck

Aug 25, 2007 | Encore ENUWI-G2 802.11G WIRELESS USB 2.0...

1 Answer

My USB wireless device is no longer recognized


Hi, I have seen this type of thing B4, & it sounds to me as if your USB WiFi has gone faulty? Really the ONLY way to check is to try another USB WiFi unit.

Aug 25, 2007 | Encore ENUWI-G2 802.11G WIRELESS USB 2.0...

Not finding what you are looking for?
Encore ENUWI-G2 802.11G WIRELESS USB 2.0 ADAPTER (54 MBPS) Logo

Related Topics:

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Encore Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Prashant M
Prashant M

Level 3 Expert

2263 Answers

Are you an Encore Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...