Ribbon is breaking constantly in every print of card

Please post the configuration for the printer which is on the left side under the cover (white sticker) and your ribbon part number. If you are sure both are correct you may have a defective print ribbon or your printer will need service.

after change the ribbon the print not get all coloures

remove the ribbon and make sure the winding is correct. It sounds like the ribbon is in backwards

please give me the solution as fast as possible.
( out of print ribbon.(pr-01726) replace the K print ribbon, replace the cleaning sleeve, and click ok when ready

Do you get any errors?
1 st unplug and plug in to reset power
2nd replace print ribbon with new one, could be bad ribbon or bad RFID tag on the ribbon
3rd try printing a different card
if still not working i would recommend sending in for service.
Contact MidWestIdSolutions.com for more info.

You have to clean the roller under the printerhead.
The big black one..

I suggest you install Diagnostics.

Go to motor test, and take the transport fast reverse. 300 sec.

Now you can clean the roller easy.

You have probably bought fake color ribbons , or you have taqken of the blue cup with the rfid inside.. Wich tells the printer what kind of ribbon installed

It sounds like the printhead temperature needs to be increased in the print driver. This will enhance the color and density of the ribbon transfer to the card.

For techncial assistance for id card printers by blog, visit our blog at www.safecardid.com/blog

There could be either of the following issues:

1. Check the print head temperature to make sure that it is hot enough to transfer the ribbon to the card.

2. The surface of the PVC card may not be image compatible. Try another brand of card or opt to 60/40 composite cards for testing.

For technical assistance by blog for id card printers, see our blog at www.safecardid.com/blog/