Question about RCA P52920BL 52" Rear Projection Television

2 Answers

Tv My RCA 52" rear projection tries to turn on a couple of times, but doesn't. At first the problem was intermittent. The set would turn on and shut off then restart and stay on. I can hear it trying to turn, but will not..Model P52920BL..Chassis # 829351257..Any help???

Posted by on

  • Henry Adams Aug 25, 2007

    I'm sorry the chassis # is PTK195KB AND THE MODEL # IS P52920BL YX1

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Probable bad flyback tranformer........T.

Posted on Oct 25, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers

See other post.

Posted on Aug 25, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rca d52w20 blinks 3 times, wont turn on


The set has a three strikes and you are out rule---tries to come on three times and then if fails, shuts down.

A short exists inside the set.

Mar 17, 2012 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

SET TRIES TO TURN, BUT DOESN'T


The RCA P52920BL uses the PTK195 series chassis. The most common reason for the set not turning on is a shorted flyback transformer. To check this, measure the B+ when the set is plugged in - it should be around 145 volts. When you turn the set on, see if the B+ drops down at all. If the flyback is shorted, the set will try to start but the flyback draws too much current. The microprocessor senses this and immediately shuts the set back off. To confirm, unsolder the jumper wire bringing B+ to the flyback and put a 100 Watt bulb in its place. Turn the set on and if the flyback is shorted, the set will now stay on but the bulb will glow as bright as if it was plugged into the wall. If this is the case, replace the flyback. Let me know what you find and we will take it from there.

Aug 25, 2007 | RCA P52921 52" Rear Projection Television

1 Answer

My rca 52" tv was working this morning than shut


Replace the Deflection board. You can get the replacement deflection board from www.tvrepairworld.com

Nov 08, 2010 | RCA D52W19 52" Rear Projection Television

1 Answer

Rca tv


when it shuts down and you try to turn it on again does the led blink/ If so how many times does it blink? let me know and I will try to help you out with the problem. Also let me know does the picture do anything abnormal just before it shuts down?

Jun 09, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA Projection TV


ok lets begin... shut off? ...is the set staying off. NO POwer at all.. does the set try to come on. does the set have a blinking led on front. have you tried unpluging then waiting 30 min then trying to turn it on again.. this set has a processor and when it detectect any fault will shut the set down

Mar 03, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA P52920BL


F32 or F36650 = same transformer = 257805 or Asti 2078

P52920BL = need service number = P52920BLXXX then I will
confirm flyback part #..................................T.

Dec 26, 2007 | RCA F36650 36" TV

1 Answer

TV turning off


INtermitant problems as the are called usally mean bad solder connections...the joints between electronic components. this set when it has a problem shuts down. This is safty cuircits. It could be a connector. when the set shuts down. it locks out for a period of time.. DO you have to uplug it to reset it? IS there any sounds. Without know more i would guess its high voltage.

Dec 06, 2007 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

RCA D52W20 52 in. Rear Projection


the main pwr board is defective and will need replacement...

Oct 18, 2007 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA P52920BL


i'd like to help.that model# looks familiar.but that chassis num you gave looks more like a serial num all my rca prints go buy chassis # is there anothe num like ctc197 exet or ptk19 doc

Aug 25, 2007 | RCA P52921 52" Rear Projection Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

jason

Level 3 Expert

905 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...