Question about Samsung WEP170 Wireless Headset

1 Answer

Samsung wp170 I cannot get the unit to power on, it seem to be fully charged quickly and when I try to power it up by holding the button for 8 secs nothing happens.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers
Re: samsung wp170 - Samsung WEP170 Wireless Headset Headsets

Try changing the battery.

Posted on Apr 18, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Power on and then power off

try holding down both buttons with a 5 count, if it reboots great, if not, your battery is dust

Mar 12, 2014 | Plantronics M25 Bluetooth Headset

1 Answer

Ilive bluetooth receiver/adapter Power button does not respond. Green light on all the time and blue pairing light won't come on...any solution please!

I had the same problem and I contacted iLives support team and it worked!
This was their response.

"Thank you for writing to us.

I'm sorry to learn that the unit is not powering off. I apologize for the inconvenience this might have caused to you.

Please try these steps given below to resolve your issue :

1. Drain the complete battery from the unit.

2. Once the battery is completely drained on the unit, press and hold the power button on the unit for 30 sec.

3. After 30sec connect the unit to a charger and charge the unit completely and have a check.

Hopefully this works for you. Let me know if you need further assistance.

Thank You,
Have a nice day.

Roger Paul"

Jul 18, 2013 | Headsets

1 Answer

Bluetooth wont turnon new unit out of box

Pardon me if you have already tried this but with my em236c I had to hold the Answer/End button for about 15 sec before it flashed red/blue. The manual doesn't say how long to hold it. It took a couple of tries for me. Hope this helps.

Jan 05, 2009 | Southern Telecom Emerson Bluetooth Headset...

2 Answers

Power up

follow the steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the AOEM device and click add
6) You will be required to enter in a pass code which is standard ‘0000’
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps
Season's Greetings from Fixya!

Chris (ziraffa)

Dec 14, 2008 | Motorola Mobility HS850 Consumer Headset

1 Answer

H700 Loosing Charge Quickly

I think the normal talk time is around 6 to 8 hrs if your battery is holding less you probably have a unit with a faulty battery
how old is your headset

Jan 05, 2008 | Motorola Mobility H700 Wireless Headset

1 Answer

Won't charge

Hold the call button for at least 10 seconds, if you get no joy, see if you can take the battery out and put it back in. Failing that, yes it would seem likely that it's defective out the box. If you bought it from a local retail store, take it back describing the defection and I'm sure they'll try to get it working themselves for you, failing that - they'll give you an option for a replacement or your money back.

Sep 07, 2007 | Motorola Mobility H500 Wireless Headset

1 Answer

Trouble connecting h700 to phone

First: When charging the light should be steady. If the battery is less than 20% charged it should be red. More than 20% it will be yellow. Fully charged it should be green. Make sure your microphone is closed when charging.

Second: Have you "Paired" the H700 and the phone? If not you need to. To put the H700 into "Pairing Mode" do this:

Make sure the H700s microphone are is in the off position. Push in and hold the button on the H700 until the light lights up purple. Release the button and quickly open the microphone button. The light will stay purple and you are now in "Pairing Mode". Now follow the instructions for your phone to pair with a BlueTooth unit. When it asks for a code, use 0000 (that is 4 zeros).

Your phone and H700 should now be connected.

Hope this helps a bunch!!!

Jan 04, 2007 | Motorola Mobility H700 Wireless Headset

8 Answers

Motorola blue tooth h700 set up

Solution 2 did the trick for me. Once I followed the instructions I was prompted for the passkey and I entered 0000, my ear piece finally works again! Thanks you!

Jan 03, 2007 | Motorola Mobility H700 Wireless Headset

Not finding what you are looking for?
Samsung WEP170 Wireless Headset Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Headsets Experts


Level 3 Expert

93802 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 2 Expert

150 Answers

Are you a Samsung Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides