Question about PC Chips M825G Motherboard

1 Answer

Cpu How to remove the CPU from motherboard

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers
Re: cpu


Posted on Aug 24, 2007

3 Suggested Answers

  • 1027 Answers

SOURCE: CPU Upgrade for Compaq (283983-001) Motherboard

download and run everesthome
click on the + by motherboard
click on cpu then click on motherboard
the cpu will id the the processor
motherboard will id the FSB speed.

click on the download latest version, left column
when you unzip and run this it will tell you if the processor is 478 or 479 pin both have 478 pins but location is different.

Posted on Mar 30, 2008

  • 1602 Answers

SOURCE: motherboards GA-945P-DS3/S3 fits CPU Core 2 Quad Q9300??


Posted on Mar 14, 2009

  • 71 Answers

SOURCE: gigabyte ga-81915 pmd motherboard/precott 3.6 cpu/upgrade cpu?

the best and cheapest up grade is RAM.
Make sure you have all the memory your machine can handle.
A quick look say it can handle Core™ 2 Extreme QX9770(3.2GHz,12 MB)
And it has a PCI-express slot so you have a big chiose of video cards.Are you using the machine for gaming?

Posted on Jan 10, 2010

Testimonial: "Sounds good to me. No gaming.Thanks."

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Please clear cmos if system no display after overclocking

Click the following picture to enlarge:

CPU Overheated
If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.

In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.

After confirmed, please follow steps below to relief the CPU protection function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.

Or you can:
1. Clear the CMOS data.
2. Wait for seconds.
3. Power on the system again.

If after clearing the CMOS you still have no display, you may have damaged your motherboard, CPU, or RAM. If you need further assistance with this Motherboard, let me know.

Mar 25, 2011 | Biostar G31-M7 TE Motherboard

1 Answer

I put a new power supply & heatsink with fan in my system & now I can't get it to power on. The heat sink was VERY hard to get on. I even put the old power supply back in & it won't power on....

If your CPU is sticked on the heat sink due to heat sink cement, could have damaged your CPU pins. Those CPUs like AMD and IBM Desktops we need to unassembled the same by tilting method. If your CPU pins are damaged, remove your CPU from heat sink by the help of a chisel type screw driver and clean both faces of heat sink and CPU. Do not scratch, use isopropyl alcohol to remove heat sink cement. Inspect any pins are dented or damaged. Align pins, if broken solder with help of a goldsmith. Reinsert the CPU in motherboard socket, apply a little portion heat sink cement in cpu face and re fix heat sink and recheck the motherboard.

Feb 12, 2011 | Biostar M7VIG-400 (M7VIG 400-COMBO4)...

1 Answer

Power supply works but pc doesn't power up no lights and fans dont work

Have you checked the power supply in different system? If yes then first replace CMOS battery and switch the CMOS battery jumper. And while doing this please unplug the hard disk or optical drive data cables and power. If it does not work then check the power switch is working or not or it is perfectly connected with the front panel PINS on the motherboard. If it is not connected perfectly computer will not start after pressing power button.
Second Level Test : Remove the CPU Fan - replace the CPU perfectly - again place the Fan.

Third Level (motherboard test): Just take the motherboard removing CPU,RAM, SMPS - use another same type CPU, RAM and SMPS - if it does not work so it is motherboard problem. If it works may be CPU problem.

Jun 12, 2010 | Gigabyte GA-8LD533 Motherboard

1 Answer

Cpu high temperature, cpu shutting down

The CPU is shutting down because it is overheating (ie thermal shutdown) and won't boot up again until it has cooled down. If this problem is not fixed, eventually the CPU will fail completely.
Check the CPU fan to see if it spins freely. Also check the power supply fan to see if it spins freely. If the CPU fan has failed, then replace the CPU fan. The CPU fan and heat-sink assembly may be clogged with dust, if so loosen the dust and vacuum to remove the dust.

May 11, 2010 | ASUS P5L-MX Motherboard

2 Answers

I have a Gigabyte GA-7N400-L motherboard CPU problem

dit you try a bios update?Some motherboard needs a bios update for a newer cpu.

Jan 17, 2010 | Gigabyte GA-7N400-L Motherboard

2 Answers

Fails to boot, fans and lights on, no bios or anything

My recommendations would be to remove all connections to the board.
Remove the CMOS battery.
Remove the CPU fan and CPU.
Look at the top of the CPU, if you have a crust over the top of the CPU, you will need to remove it to a clean surface.
Next, your CPU fan should be a 3 wire connection on the motherboard, within two inchs of the CPU holder.
After cleaning the CPU, re-inseart and apply a heat sink lub for good heat transfer.
Re-install CPU fan and plug in to board connection.
Re-install your CMOS battery and power up unit.

With the CMOS battery removed, the time and date will need to be reset.
Also, in the BIOS for that board, you should be able to see temps. and rpm readings. ??
Hope the CPU has not taken a dump on you.!
Before you plug in the drives and other devices, check temps. rpm and voltages.
Have fun, hope this has helped you.

Oct 06, 2009 | ASUS P5GD1-VM Motherboard

1 Answer


Check to make sure the CPU fan is plugged into the motherboard CPU fan power pins. Should be a 3pin port on the motherboard near the cpu with a white piece of plastic on the one side of it to show you are to plug in the cable correctly.

See if the fan spins at all on start up, or even when the computer is off, spin it with your finger and see if it gets hung up anywhere while it spins.

Mar 18, 2009 | Intel Motherboard

1 Answer

BIOS error - CPU is unworkable or has been changed

try to reset cmos by removing CMOS battery from motherboard and reinsert again...

Dec 12, 2008 | Abit KV7-V Motherboard

2 Answers

Changeing a cpu is a simple process.

First step, remove the cables and open the case.
locate the cpu - heatsink

it debends on what kind of heatsink it has, simply turn the lever
or use a screwdriver to unhook the metal connector. If you don't have enought room you might need to remove the powersupply first.

handle the cpu with care, ones the heatsink is removed you can
pull up the lever next to the cpu to unlock it

now you can remove the cpu with your fingers by the edges.

place it in a safe location, and go ahead install the new cpu.
optionally apply some thermalpaste and attach the heatsink
and the power connector for the heatsink fan.

you are done.

Jun 11, 2008 | Soltek SL-85DRC Motherboard

Not finding what you are looking for?
PC Chips M825G Motherboard Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Chips Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

1602 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a PC Chips Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides