Question about JVC GR-AXM18US Camcorder
I had this same issue and it was driving me crazy. If you do not turn the camcorder on and hold the eject button, when it is trying to eject tap right in the middle of the tape (next to the eject button) I had to do this twice before it opened but it worked. It tends to tighten the tape up and reset that error code message it is receiving internally.
Posted on Jun 03, 2009
The operating manual could be downloaded from here
Posted on Jun 16, 2009
SOURCE: Mini Dv
there is an odlong panel on the right side of the camers above the tape case pop it off and use a q-tip to clean the heads i put a tape in and ran it on ff an rew a couple of time with the q-tip and i have no more lines took my a week to figure it out (duh) lol
Posted on Sep 11, 2009
Please try the following things :
1. check the battery contacts for dirt or rust and these are contacts both on the battery and on the camera. clean with solvent or file to remove the dirt or rust.
2.check that you have removed the charger DC cord from the camera before using the battery.This has happened in a few cases.
3. get some solvent e.g ethanol, spirit etc and drop it into the hole where the DC cable from the charger enters the camera. plug the DC cable into the hole in and out rapidly and several times to clean the contacts.
If the above measures fail, take it to the repairman.
Posted on Oct 10, 2009
Tips for a great answer:
Jul 13, 2011 | JVC Video Cameras
May 15, 2011 | JVC GR-AXM18US Camcorder
Oct 12, 2010 | JVC GR-AXM18US Camcorder
Oct 08, 2009 | JVC Video Cameras
Sep 11, 2009 | JVC GR-D90U Camcorder
Jun 15, 2009 | JVC GR-AXM18US COMPACT VHS-C 20X OPTICAL...
Nov 27, 2007 | JVC GR-AXM17U Camcorder
Nov 27, 2007 | JVC COMPACT VHS-C CAMCORDER
25 people viewed this question
Usually answered in minutes!