Question about Helio Ocean Cellular Phone

1 Answer

Slider The top part of my Ocean broke off and I need to kno how 2 fix it ASAP

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: Slider

If you signed up for extended warranty you can turn it in for another one. if not i think you can still get the extended warranty and then call in telling them your phone broke.

Posted on Mar 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

The screen is blank. The keys light up but I cannot see anything on the screen. I have tried to turn it off then back on but it doesn't work. What can I do to fix it?

Sounds like the flex cable is went bad. You can get them for around 6.00 on ebay with a tool kit to open the phone. Really simple to change them.

Feb 18, 2010 | Helio Ocean Cellular Phone

1 Answer

Can i flash helio ocean 2 to cricket

as long as its does not have a sims card it should be flashable to crickety

Feb 10, 2010 | Helio Ocean Cellular Phone

1 Answer

I broke the belt on the bak of my web slider how can i fix it well... i think it is called the belt ant way its when u slide it up and on the bak is the little strip of wire stuff that powers the phone and...

Flex wire that's what it is called, you gotta go to cellphone parts supplier to get one of those, or to the service center of your brand unit.

if no available on your area, contact us , try to be a remium member to guide you all the way

Nov 01, 2009 | Cell Phones

1 Answer

Ocean 2 cuts off my texts

keep your phone open until the messages complete

Jul 08, 2009 | Helio Ocean Cellular Phone

1 Answer

How to put new fascias on w910i helllllllllllllp

  1. Turn off the phone.
  2. Remove the 4 screw covers on the back of the phone, 2 on the top of the main body and 2 at the top of the slider.
  3. Take out the 2 screws at the top of the main body.
  4. There is a 3rd screw on the right hand side of the phone above battery pack, take this out. dont forget where each screw came from.
  5. you can now remove the back plate.
  6. next you will need to remove the 2 screws on the top of the slider.
  7. Remove the battery pack.
  8. (make sure the slider is OPEN) You will see two screws on either side of where the battery pack was. Remove these.
  9. You can now Remove the front plate.
Bassically uncrew all the screws. take it apart, put your new stuff on and then do everything again backwards.

Mar 25, 2009 | Sony Ericsson W910i Cellular Phone

4 Answers

Helio Ocean..blank screen

I managed to fix mine! It takes some doing and is probably not for the faint hearted. You have to disassemble the Ocean from the battery side, removing the qwerty keyboard, to gain access to the slider assembly.

Disassemble the slider (pay attention to the spring!) and clean all contacts and make sure all of the flex cables are seated completely. Mine was working OK the qwerty way, but was blank and/or garbled the long way. Now it works great!

Sep 09, 2008 | Helio Ocean Cellular Phone

1 Answer

ORXAN FROM OCEAN CITY MD. visit that site for the k750i lcd, but u need to find out if the ribbon cable is either yellow or green before ordering... the cell is held together by 2 screws below the battery... i cud giv u a step by step if u want

Nov 19, 2007 | Sony Ericsson K750i Cellular Phone

6 Answers

My Helio Ocean has a nonresponsive keypad.

solution: throw the piece of s**t in the trash

Aug 21, 2007 | Helio Ocean Cellular Phone

Not finding what you are looking for?
Helio Ocean Cellular Phone Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Helio Cell Phones Experts


Level 3 Expert

57376 Answers


Level 3 Expert

94313 Answers

Najwa Ahmad
Najwa Ahmad

Level 3 Expert

381 Answers

Are you a Helio Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides