How to plug the power switchs (m/b sw, reset sw, hddled & power led)? Matsonic MS9357E thanx

http://www.the-manuals.com/matsonic-motherboard-ms9357e-pdf-manual/

PDF.

http://www.the-manuals.com/matsonic-motherboard-ms9357e-pdf-manual/

PDF.

Download a manual here:

http://www.msi.com/product/mb/K9N6SGM-V---K9N6PGM-FI---K9N6PGM-F.html#/?div=Manual

The front wires are usually for power, hdd led. power button and reset button and sometimes extra usb ports and audio ports. All motherboards have a small section that has 8 to 10 grouped pins protruding that you can attach these wires to. The motherboard will diagrahm where the pins hsould go. For example the light for the hard drive wires are probably labeled "HDDLED" and there is two of them. One positive charge and and ground. On the motherboard, in the grouped pins there is a small label that goes:

''___'
'_____'
HDDLED
PWLED

It may look like this but in a different arrangement. What does this mean? Connect HDDLED to the top two pins. Doesn't matter which way the positive and ground go. And connect the power led PWLED to the bottom pins. Follow this for all the other labels.

if it is an audio driver for a Matsonic MS9357E then i have it. email me at [email protected] but its 21MB

the symbol is there writen there on the board or abrivation you can follow it.. like( pwr sw/ Hddled/ spkr..

please help me seach manual for motherboard matsonic ms9158ep

Hi zecateixeira, it seems there is no manual for you're motherboard MS9357E. Click on this link below.
http://safemanuals.com/zearch_3558.php

Mike

http://safemanuals.com/user-guide-instructions-owner-manual/MATSONIC/MS9327E-_E

This will definitely help you

Hi, on the edge of your mother board closest to the front of the computer, you will find a double row of pins. Use a torch and if needed a magnifying glass and study these, you will find they are labeled the same as your cables from the case.
In some cases the plugs are set as a 3 space plug, if you find one of these that wont fit. just split it. If you plug the LED wire back to front, don't panic it won't hurt they just wont work. The power and reset are not pole sensetive.
Goodluck mistyman