Matsui 2gb mp3 player

STEP 1 - Connect your flash drive, MP3 player (in MSC mode), memory card or card reader to the PC

STEP 2 - Open Disk Management

Windows 7 or Vista
Click Start, right-click on Computer and select Manage.



Windows XP
Click Start > My Computer > Manage.


Under Storage, click Disk Management on the left pane.
Windows 7 or Vista


Windows XP


STEP 3 - Format the device / MP3 player
1. Right-click on the drive / device you want to format then select Format.


2. Occasionally, a warning may come out concerning active partition, click Yes.


3. You can leave the formatting options such as the Volume label and File system to default.
4. Click OK to format.

Try this:

STEP 1 - Optimize the flash drive for performance
1. Plug in the device to the PC.
2. Double-click My Computer.
3. Right-click on the flash drive, then select Properties.
4. Click the Hardware tab.
5. Select the SanDisk Cruzer USB Device disk drive, then click Properties.
6. Click the Policies tab.
7. Select Optimize for performance, then click OK.

STEP 2 - Format the flash drive
1. Double-click My Computer.
2. Right-click on the flash drive, then select Format.
3. In the File system list, click NTFS.
4. Click Start.
5. Click OK to start formatting.

1. Connect one end of your USB cable into the USB port on your MP3 player and plug the other end into an empty USB port on your computer.
2. Double click "My Computer" on your desktop. You MP3 player should be listed as a hard drive. Right Click it and select explore.
3. Double click the "Media or pictures" folder, then drag your pictures into this folder to download them to your player.
4. Double click the "Safely Remove Hardware" button on the bottom right on your screen, then locate your player on the hardware window. Click "Stop." After the popup windows says its OK to remove your device, safely unplug your player.
5. Turn on your player and select "Pictures" on the main menu to view your downloaded photos.

If that is not working try doing it the drag and drop way:

1. Connect one end of your USB cable into the USB port on your MP3 player and plug the other end into an empty USB port on your computer.
2. Double click "My Computer" on your desktop. You MP3 player should be listed as a hard drive. Right Click it and select explore.
3. Double click the "Media or pictures" folder, then drag your pictures into this folder to download them to your player.
4. Double click the "Safely Remove Hardware" button on the bottom right on your screen, then locate your player on the hardware window. Click "Stop." After the popup windows says its OK to remove your device, safely unplug your player.
5. Turn on your player and select "Pictures" on the main menu to view your downloaded photos.

This is an easy process, just connect a commercial USB cable that is compatible with your device or the USB cable that came with it to ur computer. go to my computer and double click on the MP3 player drive icon. Navigate to the MP3 drive folder where ur music files are stored, launch windows media player( WMP 11 is AVAILABLE AT MICROSOFT.COM/DOWNLOADS) or if you already have windows media player 11, that's good. click on tools in WMP and select OPTIONS, click on LIBRARY and click on MONITOR FOLDERS. select ADD to add your MP3 player drive to the list of monitored folders, after you finish adding the MP3 player to the list, click on OK and windows will search the drive for music and video files and add them to your WMP Library.

There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor

reflash the firmware that came on the CD or get it here http://rs211.rapidshare.com/files/47672273/120MR_firmware.zip

1) Disconnect from computer, turn it off, hold in volume + button and reconnect it to your computer - continue holding volume + until the Found Hardware Wizard comes up.

2)
REFORMAT FOR WINDOWS MEDIA PLAYER - Erases Everything: Connect your iLo player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "ILO 2GB" (wording may vary slightly), and then select "Format." - this should erase everything, and give you a fresh start.

Try to reformat it. If that is not your solution then reflash your firmware from the small CD you recieved with your MP3 Player. If you don't have that software you will find it at the following link:

http://www2.evilshare.com/358645f6-1bfe-102a-847b-00a0c993e9d6

Download it and open the the " programs " (There is only one) Once you'e in that folder.... double click on this folder "stupdaterapp.exe" Just simply follow the instructions and you should be fixed.

Take it back to WalMart and get another one. This is broken.