the lower bearings on the right hand side of the upper rack slide came out. I have all the parts but am hesitant to force bearing back into their slot. Is there a majic way to accomplish this task? will forcing the bearings back harm the slide unit? thank you in advance for your assistance.
I removed the plastic bearing holder on the under side of the slide. I know it did not fix the problem, but it eliminated the bind that would not allow the rack to slide out completely. Thanks
Viking double oven The delay setting will not turn off or clear - when timer setting and off is...
(More)
Viking double oven The delay setting will not turn off or clear - when timer setting and off is pushed it continues to read delay and time - what was pushed to set this and how can it be cleared?
Hi - I used the self-clean feature on my Viking oven 2 days ago and now it won't unlock and I can't...
(More)
Hi - I used the self-clean feature on my Viking oven 2 days ago and now it won't unlock and I can't any burners or the oven to work. Any advice would be appreciated.
water was shut off during dishwasher cycle not dish water will not work no water even though water...
(More)
water was shut off during dishwasher cycle not dish water will not work no water even though water is back on
Viking dw 20.3 does not complete cycle or open soap door. It does drain and fill ok . When it stops...
(More)
Viking dw 20.3 does not complete cycle or open soap door. It does drain and fill ok . When it stops both "pots and pans" and "heavy" are lit, but dishes are dirty. .Thanks, JimBringe@hotmail.com