My lower part of the LCD wont work

new batteries take around 6 hours to charge
batteries lerft without use will self discharge over time

clicks means a starter solenoid has gone bad... wont start is a whole other issue... possibly a CDI issue

Hello:
Your main motherboard is failing.. You need to contact the vendor that sold you the fridge as there is warranty on the unit.

replace the charging relay

check timing and valve adjustmen.

Yes video drivers need to be updated then go back where you went to change the resolution and click keep this resolution I think you mistakenly told not to accept it this happens.

Please leave postive feedback and ratings today

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

I had the same problem, contacted Keurig and they suggested the descale procedure, which did not work. I was able to resolve the problem however.
First I went through a gallon of white vinegar, without results. Then I did the following:
Went to Walmart and bought "Brew Rite". Tried 8 cup mixture (8 cups of water, two tablespoons of mix), did not work. Being persistant, put in another 8 cups, let sit 2 hours and then put in clear water. By the time I got half way through with the clear water, the device started working properly, no problems since.

I checked all cords connecting the monitor to the computer, made sure nothing was loose.  Then I re-booted the computer, and the monitor is on.

Try a reset:
http://www.tomtom.com/support/index.php?Language=1&query=reset&FID=6965

If fails, try:
Download Clear_Flash
Read step by step HERE

This isn't a permanent solution, but it has worked for me. The first time I found out about this solution was when the status light went out on my Tatung. I just left it unplugged and didn't plugged it back in for about a month and a half just to see what it would do. When the status light came back on, I knew if it ever did it again, I could try the same thing. Well, a week ago last Sunday, the status light went out again, so I just kept track of when it went out and when I plugged the power cord back in to see if the status light would come back on. Today when I plugged the power cord in, the status light came back on. That was 9 days. I don't know if it could be less than that because the last time I plugged it back in to see if the status light would come on was around last Friday. So it might have worked sooner. Anyway, this seems to work for me. I don't know what is causing it to lose power in the first place, but at least I know what to do.