Question about Quinny Buzz Jogger

3 Answers

Quinny buzz when i am pushing the pram every now and then it will click out of place like it wants to shut itself back down, when my baby is in it and it does this its very worrying also if i am pushing it up hill it sometimes clicks out of place at the sides any suggestions is this a normal fault or anything do you know

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Has the brake cable come outy of position and is stopping it opening fully? This happened to mine and was easily fixed!

Posted on Jul 03, 2008

Ad

My Hydraulics are fine, but the problem is the metal piece that the hydraulic rod presses against to provide resistance is broken.   Does anyone know where to get it repaired ?   I bought the european one and is out of warranty as well.  Can you send the chassis to dorel in usa and pay for a repair ? 

Posted on Dec 17, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the exact same problem with my quinny buzz. When i went to get it repaired i was told that we had broken the gas line in the hydrolics in the frame. When i tried to collapse the buzz for the first time, when i got the the point where you meet some resistance (if you haven't pressed and pushed the buttons properly) i forced it closed which broke the hydrolics. This can't actually be repaired but the pram can still be used safely as long as you manually snap the frame up, ensuring it locks into place. The two black parts meet at the top when it's locked in properly so you should be able to see if it is or not. Make sure when you collapse the pram that you do press and push the buttons fully. You should meet no resistance and it should collapse freely when this is done properly. Hope this helps!

Posted on Sep 11, 2007

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 20 Answers

SOURCE: quinny buzz

This sounds like a faulty quinny. If it is collapsing while you are pushing it, you should immediately contact quinny: find out the contact information on quinny.com . It is country specific, so you will have to choose yours and go from there. Let them know that it is collapsing on its own and they should send you a new chassis.

Hope this helps,

StrollerInfo
www.StrollerInfo.com

Posted on Jul 22, 2008

  • 223 Answers

SOURCE: quinny buzz

Hi if you have not got bags on the handle then yes it needs replacing if it is less than 2 yrs old you can call dorel to fix it, also I have heard that if you send the frame to them & £30. for a service the will fix it. Let me know if this works.

Posted on Aug 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you put chicco travel system pushchair down


Hi,

This is relatively straight forward.
Stand behind the pram, pull both triggers on the handles, and then pull the handle loop at the back of the pram which will then enable you to push the pram dowards and fold.
Practice a few times and you will be perfect within a very short time.

I hope this helps.

Oct 02, 2009 | Chicco C1 Trio Auto-Fix TS Iceberg...

1 Answer

How do you fit the ventura plus car seat onto the silver cross 3d pram?


Hi,

This is a little difficult to explain in text, but here goes..

Recline the seat unit to it's lowest position.
On the arm rests of the pram, there is a piece of fabric covering each arm, these are attached via press studs, undo these and fold them backwards onto the seat area.
This will reveal a plastic hook underneath, these are folded down and need to be raised upwards.
Next, get the Ventura carseat and ensure that the handle is in the carrying postition (i.e facing upwards). On the base of the carseat at the back (directly underneath babys head) there is a distinct cut out shape that will fit snugly onto the bumper bar of the pram, place the carseat on top of the pram (so it is positioned on the seat facing you) and push it down gently. If this is the first time that you have done this, the material may be quite plumped up so you may need to push a little harder.
At the base of the carseat handle either side, there is a button (this is used to adjust the handle position) push these buttons down at the same time and move the handle backwards (away from you) until the handle makes an audible 'click', this means that this has now secured onto the plastic hooks that you first exposed on the arms of the pram.

This should now be securely fastened onto the pram.
I would also suggest that you visit this website as per the link below and download the user manual for the 3D so that you have this is picture format in front of you.

http://www.silvercross.co.uk/contact/instruction-manuals/

I hope this helps.

Sep 23, 2009 | Silver Cross 3D Stroller

1 Answer

Difficulty unfolding phil and ted stroller


Hi,

I find that the best way to do this is the following;
Make sure that nobody is standing behind the pram (expecially small people!)
Make sure that the seat unit is raised.
Stand to one side of the pram, bend down and with both small black plastic buttons, push inwards (so that they are going toward eachother)
The back of the pram should fall to the floor.
Where the childs back of the knees are, lift up the fabric a little and grab the black metal bar, then lift this up and the pram should collapse nicely. You should have a ******** the handle bar with a popper on to secure this shut.

I hope this helps.

Aug 13, 2009 | Phil & Teds Explorer V2 Twin Stroller

1 Answer

Pliko p3 How do I set it so that baby is facing me


If you recline the seat fully and fold the footrest up, then take off the canopy and put in on backwards, you can lay your baby down (almost) flat and it will be as if you were pushing a pram-style carriage. The stroller frame itself does not change (as with the Pliko Switch); you just reverse the canopy and lay the baby down so that his/her head is where the feet would normally go and his/her feet are where the head would normally go. This set-up looks especially cool, in my opinion, and you can look at your baby while strolling.

If I haven't done an adequate job explaining, there is a website that has pics of the stroller with the reversed canopy. I can't remember the exact name of the site, but if you google "strollers and prams + Pliko" you should be able to find it. Good luck!

Dec 28, 2008 | Peg Perego Pliko P3 Classico Freestyle...

1 Answer

Quinny buzz


Hi if you have not got bags on the handle then yes it needs replacing if it is less than 2 yrs old you can call dorel to fix it, also I have heard that if you send the frame to them & £30. for a service the will fix it. Let me know if this works.

Dec 19, 2008 | Quinny Buzz Jogger

2 Answers

Cant open up the crib as it is collapsed. Red Hauck Infinity Pram


hi there are two bars one at each end. you need to fold them down they very stiff
good luck

Dec 06, 2008 | Hauck Infinity Stroller

1 Answer

3d pram


i hope by now u have solved this but here is how to do it anyway may come in handy with ya next, take d hood off and put it back on back to front now lie seat all the way back then place the liner in and put apron on done .

Aug 13, 2008 | Silver Cross 3D Stroller

1 Answer

Quinny buzz


This sounds like a faulty quinny. If it is collapsing while you are pushing it, you should immediately contact quinny: find out the contact information on quinny.com . It is country specific, so you will have to choose yours and go from there. Let them know that it is collapsing on its own and they should send you a new chassis.

Hope this helps,

StrollerInfo
www.StrollerInfo.com

Jul 06, 2008 | Quinny Buzz Jogger

1 Answer

Valco pram repair


Hi there.

If it is a plastic moulding that has stuck, use a silicone spray (mr sheen will do) to release it.

If this will not help at all, try your nearest Halfords bike department or bicycle repair shop. I doubt they will charge you anything.

If it is a broken part, find the manufacturer for ordering a replacement.

Hope this helps,

Jun 11, 2008 | Valco Baby Gear

2 Answers

2nd hand BEBEcar Adventure raider AT+


Hi, I have just bought second hand the exact same pram. You have to push in the red button in the middle of the handle, then turn the handle down towards the floor. By putting a little pressure on it it should now start to fold down. Hope this helps.

I have my own dilemma though. When the carry cot is on as a forward facing pram, does the seat unit come off that you use for the buggy?

Apr 17, 2008 | Bebecar Raider AT Stroller

Not finding what you are looking for?
Quinny Buzz Jogger Logo

776 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quinny Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

149 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

ray gallant

Level 3 Expert

52919 Answers

Are you a Quinny Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...