Question about NEC MobilePro 900c Pocket PC

2 Answers

NEC MobilePro 900c softeare

I have downloaded several Microsoft CE programs but the device tells me they are not valid Windows CE applications. Why?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers
Re: NEC MobilePro 900c softeare

Could be you are using the .exe files meant to be installed by activesync, not directly on the device. Otherwise, it could be a different processor type like previously mentioned (i.e. MIPS application running on ARM processor). Or maybe made for a later or much earlier version of win CE.

Posted on Dec 30, 2008

Re: NEC MobilePro 900c softeare

Maybe is because processor ou version of windows ce

Posted on Jun 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

NEC Mobilepro 900c will not connect w/computer

Are you using the NEC Mobilepro 900c drivers? I'm sure the drivers are different. YOu can find the XP drivers here: In addition, you should make sure that you have Activesync 3.8 or older. You can find it here:

Dec 25, 2007 | NEC MobilePro 900c Pocket PC

2 Answers

Upgrade from reader to full function

Yup, softmaker company release a version like word,excel

Sep 21, 2007 | NEC MobilePro 900c Pocket PC

2 Answers

Mobilepro 900c Ethernet Card

I use the AVAYA wireless card. It needs to be wireless B. Dowload the driver for it when you sync. Then it should work.

Aug 21, 2007 | NEC MobilePro 900c Pocket PC

2 Answers


Perhaps the programs you are trying to install are designed to run on your desktop PC and use activesync to transfer to the PDA..?

Aug 19, 2007 | NEC MobilePro 900c Pocket PC

1 Answer

Looking for software and I have a I.E. question

Olive Tree has a Bible program that runs fine on the 900c.

Aug 18, 2007 | NEC MobilePro 900c Pocket PC

2 Answers

Device not detected

download the usb drivers

Jul 29, 2007 | NEC MobilePro 900c Pocket PC

1 Answer

Word & Excel programs for NEC 900C

Textmaker might help, I think they have an excel program as well, if not there is one around, you might look on Pocket PC magazines forum there are some 900 users over there.

Sep 15, 2005 | NEC MobilePro 900c Pocket PC

1 Answer

MobilePro 900 turn on during the night and not shut back off

Devices running Windows CE 3.0 turn on at midnight to search for appointments for the coming day. Reminders are set and the Today view is updated with the day's events. The device is supposed to turn off after three minutes of inactivity. If a program is running the unit may not turn off because there is activity. The following applications are known to cause problems: * Windows Media player for Pocket PC. * Active Sync * Wireless LAN adaptors NEC has developed a registry patch that has been tested on the following LAN cards. Device Vendor Driver Cisco Aironet 340 Cisco 2.30.11 Cisco Aironet 350 Cisco 2.30.11 Linksys WPC11 Ver 3 Linksys 1.07.29 Orinoco Orinoco 1.02 3CRWE737A 3 Com LA4137 Wireless Network Symbol N/A For additional information see Microsoft Knowledge Base Article – 263719 Click here to download the Power Management update utility. Installation procedure. Note: Anytime a “hard reset” is performed on the MobilePro 900 the Power Management update utility needs to be re-applied. 1. Download the Power Management update utility to local system. 2. Copy the Pwr_Mgt.exe file to the MobilePro 900 desktop. 3. Double tap the NEC Icon. 4. Click OK. 5. With power on momentary depress the “soft reset” on the bottom using the stylus. 6. Delete the NEC Icon on the desktop.

Sep 14, 2005 | NEC MobilePro 900 Handheld

Not finding what you are looking for?

Open Questions:

0 Answers

I WAS TRYING TO INSTALL JLIME ON MY MOBILEPRO 900, EVERYTHING WAS DONE AS PER THE DOCUMENTATION AS PER THE WEBSITE. AFTER ALL THE STRESS OF PARITIONING THE FLASH CARD.. I GOT THE FOLLOWING ERROR.. "ROOT=/DEV/HDA2" NOT found kernel Panic VFS cannot mount I dont understand a bit of this error.. i ahve tried all the zImage files on the website.. but still I am getting the same error. I used the Henchman.tar--------( All the versions avaliable on website" Haret.exe as kernel Bootloader file which read as below # boot a kernel with HaRET # # have the kernel zImage and the Haret executable in the same dir as this file # this file if named 'startup.txt' will automatically launch the kernel when you start Haret # # 'set MTYPE 659' is for the NEC MobilePro900c # # in CMDLINE change 'root=' to point to the location of your root filesystem # eg 'root=/dev/hda1' is the first partition on your CF card # and 'root=/dev/hda2' is the second partition # set KERNEL zImage-2.6.23mp900c set MTYPE 659 set CMDLINE "console=tty0 console=ttyS0,115200n8 root=/dev/hda2" bootlinux i have tried mentioning "hda1" , "sda1","sdb1","sdb2" I believe its not the problem with the Henchman file or is it??? I have the following partitions sdb1 as boot flag which is fat-1GB sdb2 which is of ext2-2GB sdb3 as SWAP-1GB i loaded the boot files in the Fat ie the Haret.exe Zimage and startup.txt file in fat system Please help me out in removing this error and getting Jlime installed in My Nec Mobilepro 900.. I used a transend 4GB flash drive

Jul 16, 2011 | NEC MobilePro 900c Pocket PC

See all NEC MobilePro 900c Pocket PC Questions

NEC MobilePro 900c Pocket PC Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC PDAs Experts


Level 3 Expert

18258 Answers

Jay Seifried

Level 1 Expert

51 Answers


Level 3 Expert

93922 Answers

Are you a NEC PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides