Question about Hitachi Thunder 9500 V Series (DFF600ATE250P)

1 Answer

Create LUN How to create the LUN in the storage sub system.

Posted by on

  • shirinr Sep 09, 2008

    Hi !

    I need an architecture guide of HItachi 9970V/9980V storage system. Can you suggest me from where i will get it?

    thanx and regards

    Sherin R



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Hi, Logical Unit Number(LUN) can be configured VIA web based inbuilt software on Hitachi. and for device configuration you can use either hitachi HDLM or Opstore to Monitor. Detail you problem so that I can brief you lot. By that time you can check Thanks Arun

Posted on Aug 25, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


teri maa di lun saleya lun farr k chuppa la fudi deya lun farr sala...........

Dec 14, 2010 | Toshiba Satellite M30X Notebook

1 Answer

I am getting a 1005 2082 error on my HDS 9985 (NCS-55) when I try to delete a LUN assignment. Can you help?

1. RDP (mstsc ->IP address) to SVP of this storage (you can also connect via serial cable to storage)
2. Make sure SVP is in modify mode
3. Go to Install -> Change Configuration -> LUN Confirguration
4. Go to particular port on which your Host Group is reside.
5. Check LUN status: If it's other than "Normal" then you have to generate password to unreserve LUN. (password you will get from HDS support.
6. Once you have password right click LUN & do force reset. Enter Password & it's Done :) LUN status will come back to Normal & you will be able to release the LU path.

Oct 28, 2010 | Computers & Internet

1 Answer

Tape drive is not showing up on scsi chain

The SCSI terminator may be disconnected.
If no physical terminiator, then one of the devices has the terminiation set.

Also, check the LUN (logical Unit Number) make sure each SCSI device has a unique LUN. The LUN can be set on the back via the "push button"...

Sep 30, 2009 | Sony AIT SDX-S300C/TB AIT Tape Drive

1 Answer

How to configure AX 150

EMC offers a great documentation site.
Here is it:

You can select Install and you can create a great customizes doc for installation steps.

Generally you can configure AX150 from a web based interface.
Enter the ip addess of the storage processor and a java application will appears.
You should do the following:
1. Create raid groups
2. Create LUNs on raid group
3. Register the hosts
4. Add hosts and LUNs to a storage groups

Dec 17, 2008 | EMC CLARiiON AX150

2 Answers

Excel formula creation

= (a3) minus (b3) won't do it for you?

Sep 05, 2008 | Excel (SS8SATAS5128400R)

1 Answer

Saving pics i take

you have to create seperate photo albums and folder names. the the camera labels your pictures 1 2 3 and so on. so when those numbers come up again they are overwritten with the new info. so to avoid this...create one folder.(main)... then open that folder and create a new (sub)folders within the main folder for every download hopefully 10 or so more pictures at a time per sub the sub filders according to the content or, the current date which they were downloaded. what works well with myspace is your personal picture storage online for free. but til then the simple way is to keep this main folder in my pictures...most sites assume your pics are already there. it is the default directory with your msp,s(myspace pik's) ready to upload.

Jun 02, 2008 | Philips J44414

2 Answers

My Iomega Network Hard Drive has a Problem

Reinstalled your network? I'll bet your network setting change gave your computer a new system identifier... and that the Iomega has data encryption set up to prevent anyone other than the original computer name from reading the data. What it sounds like is that when you are trying to connect to it, the Iomega is telling you that you can create a new 7Mb LUN, which is probably allocated as overhead space. Can you connect directly to the Iomega and turn off LUN security and data encryption? I'm not certain how the LUNs are created on this unit or if additional data encryption software was used, but it could be that the LUNs are set up with encryption as well. If the data encryption has it locked down to only present to the original device key, you may have no other choice but to blow away your data and start fresh. If this network hard drive is your only disaster recovery plan, I would suggest that you add a tape device and do an incremental back up this drive daily to a rotating pool of media... and a weekly full backup of everything on your network. A network hard drive is only meant to be a central storage location where multiple hosts can read/write data. The tape backup can then be used to recover your data in case of a disaster... like you've got.

Oct 26, 2007 | Iomega NAS 200d 160 GB Hard Drive Array

Not finding what you are looking for?
Hitachi Thunder 9500 V Series (DFF600ATE250P) Logo

Related Topics:

702 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

77932 Answers

Are you a Hitachi Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides