Question about Sharp 27R-S50 27" TV

1 Answer

No power tv comes on for about a minute then shuts down and wont come back on. it appears the horiz- out is not running and there is no voltage coming from the regulators on the secondary side of the low voltage supply.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers
Re: no power

Look for high voltage cap like 200-250v 100uf that could be bad around flyback. Also look to see if reg. shorted, and horz. output bad.

Posted on Aug 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Power will not come on, but fuse is good

i dont know about a code but i would check my 5 volt standby power supply voltage ,and depending on tv check all standby voltages with set pluged in only .if stand by voltages is good check for horiz drive at base of driver trans when you press the power button

Apr 16, 2009 | Standard (CRT) Televisions

1 Answer

Sony 36brx800 shuts off on own

As a TV tech the simple answer is no! If you were a well qualified electronics tech but just not used to TV's then the answer might be a very weak 'maybe' and that's if you had a TV tech talking you thru the whole process on the phone.

shutdown probs can be the power supply, bad solder joints, or also very likely the high voltage power supply. Meaning the area where the TV generates upwards of 30 thousand volts!! The set has overvoltage protection that makes sure that things don't completely fry, catch on fire etc.

Ya really need special training to avoid getting zapped with tazer like volts or worse! Sorry but safety says better stay out of this one!

Feb 11, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Rca flat scren hd tv

Examine horiz circuit with magnifier.....look for bad solder
connection.............check power supply area and solder pins of
horiz output transformer.............T.

Mar 19, 2008 | RCA 32F531T 32" TV

1 Answer

H.V shuts down/

try to check a bad conections in hv transformer and capacitor around them

Feb 01, 2008 | Zenith B27A11Z 27" TV

1 Answer

TV won't turn on...

Probable bad flyback transformer or shorted cap in horiz circuit,
horiz output xistor suspect,also...................have tech check or
replace set....................T.

Dec 03, 2007 | RCA 32F530T 32" TV

1 Answer

TV shut down while watching

Install horiz driver kit # 483513057673....applies to all L04.1
chassis.....+ replace 47mf/25v cap in horiz driver circuit...T.

Nov 28, 2007 | Philips 32PT6441/37 32" TV

1 Answer

RCA Guide Plus Gold Gemstar

The set tries 3 times to come on (3 blinks) if there a problem such as a short, it will cycle without turning on. Unfortunately your set is notorious for having bad flyback transformers. Most likely the horizontal output transistor is shorted as well. Common causes for your symptom are: LL05 (horiz out transformer) RCA part# 257805; TL 02 ( horiz output transistor) 2SC5148; and open connections on the printed circuit board at LL 04 and L14401 (coils) all of which can cause the horizontal output transistor to be shorted.


Nov 25, 2007 | RCA F32450 32" TV

4 Answers

TCL tv

i have tcl satellite tv...the porblem is when i switched on , 5 or more minutes after, the tv unit shut off itself. Sometimes the tv scan its channels first before having picture then shut off after few minutes..varying time when shutting off.....And when using for video movies everything alright....please tell me what to do??...any solutions??..advance thanx to those who could help...

Oct 29, 2007 | JVC AV32F476 32" TV

2 Answers

Panasonic TX14S2T

What are the symptoms? Is the set dead? Please clarify

model number from back of set...The red power light coming on means the AC fuse is OK, but the B+ fuse may be bad. If that

is true,check the horiz o/p xistor and get back to me....T.

Oct 20, 2007 | Panasonic CT-27G14 27" TV

2 Answers

No picture has sound, then picture comes on after a while

check for a problem with the horiz.output circuit. maybe bad solder connections or the horiz.osc.

Sep 15, 2007 | RCA F27442 27" TV

Not finding what you are looking for?
Sharp 27R-S50 27" TV Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Cindy Wells

Level 3 Expert

4723 Answers

Are you a Sharp Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides