Question about Kirby Ultimate G Bagged Upright Vacuum
Vacume is hard to push and seems to be stuck on stupid when the transmission should be going forward it actually goes backwards with ease and forward with work. Any suggestions?
I'm not familiar with this type of vacuum, but if it's like most kirby's the powerhead gets all its motion off the tapered spindle underneath the powerhead. IF the belt is installed backwards on this spindle then all motions are reversed. there should be an arrow stamped into the blower housing. the belt should be installed so it is nearest to the arrow in the direction of the arrow on the housing.
Posted on Aug 24, 2007
Tips for a great answer:
403 people viewed this question
Usually answered in minutes!