(877) 434-9747
Full service mobile shredder repair service to...
Answer
Fellowes C-420-c, paper jam always on
Problem for Shredders
Generic problem for all Shredders
Shredder will not shred, but will go in rev...
By nicholas_del on Mar 24, 2009
We have a Fellows Powershred 420cc. We have no indicator lights and it will not shred. The motor will go into reverse mode with no problem.It seems to be the PC board. Can you help ?
Clarification Request
Posted by t_vinson57 on Mar 29, 2009
Have you spray the switch with a good penetrating lubricant, like the Fabulous Blaster PB spray (work best) but anything like WD-40 will work to clean the contact in switch, to see if both side of switch is working right and then maybe it will shredder again
Good luck
Same Problem
Mar 25, 2009
- I have the same problem it goes in reverse mode with no problem.If you get solution Please let me know. - bchadha
This Problem Also Relates To:
Aurora Electronics AS618SB (Strip-Cut) Shredder
Aurora Electronics AS890C Shredder
Aurora Electronics AURORA AS-650C Crosscut Shredder with Wastebasket
Fellowes 088-32602 (Cross-Cut) Shredder
Fellowes S40C-2 Shredder
Fellowes S701CM Shredder
Aurora Electronics AS662C Shredder
Popular Solutions for Shredders
Questions and Unsolved Problems for Shredders
Answer
Shredder SPL-1506x run but do not shred any paper and the overheat and overload come up any time a...
(More)
Answer
shredmate-12 does not wnat to run forwrd, will run in reverse, labors and trips reset
Answer
My staples shredder was working fine I gave it a rest and now the light goes on but no action.
Answer
cia12 crosscut shredder overload light came on. How to fix?
Ask our Experts
Browse popular Problems
More Common Problems
Most Common Problems for:
For Shredders:
Related Products & Issues:
Top Shredder Experts
Experience:
More than 5 years attempt with printers, computers and all office equipment
Ask Me
Top Copier & Fax Repair
