Question about Nikon N75 with 28-105 lens 35mm Film Camera

1 Answer

Film advance When loading my N75 it suddenly stopped forwarding the film to the spindle and then went to rewind before any photos were taken. Do I need to take it to a shop or is there something I can do to fix this?

Posted by on

  • lutheran May 27, 2008

    When I load film the film does not advance but rewinds completely causing me to lose a role of film.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 206 Answers

First make sure that the leading edge of the film is aligned with the red mark ( close to the pick- up spool ). If this is not your problem then you will have to take your camera in probably because it looks like the spool motor is not turning the pick up spool.

Posted on Aug 25, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Film not going through camera


E indicates empty.

try resetting the camera. Pus both the rewind buttons (plus/minus button by release button and bracket button on side of mirror box). Push them at the same time. Let the camera run until it stops (just a few seconds). This resets the camera. Then try loading the film again. Make sure the leading edge of the film isn't bent and is the edge is within the red rectangle under the take up spool. It should then load the film. Note: the N75 pulls all the film out of the cassette and then rewinds it back I one shot at a time until you reach '0'.

Aug 12, 2014 | Nikon N75 35mm SLR Camera

1 Answer

The new roll of film winds into the right spool upon closing back cover // brand new batteries displays 1/2 and ERR appears on led panel


Is the ERR blinking, and is there an additional blinking E on the display? If so, the film is not loaded properly.
The film is supposed to advance all the way to the take-up spool upon loading. The camera then "rewinds" one frame at a time as you take pictures. This way the camera knows exactly how many shots are left on the roll. Also, if the back is accidentally opened, the shots already taken are already in the can and won't be ruined.
If you need a manual, you may download a copy here.
Try cleaning the battery contacts and see whether the battery reads full with no film in the camera.
If problems persists, feel free to reply to this post and give any additional details.

Mar 04, 2012 | Nikon N75 35mm SLR Camera

1 Answer

When i try to advance my ae-1 camera it takes a picture! how do i fix it


The magnets that control the shutter are the likely suspect. Dirt and debris can cause them not to hold properly. Hence, it fires the shutter when you advance the film. It is something you can repair yourself. ............or.
you can also try....

i'm not an expert on the AE-1. It is a camera I've never had any desire to own. But on most older slr camera the rewind knob will turn when the film is advanced. But only after the slack has been taken out of the film still in the canister. Since you've already taken a few shot the film shot be very secure on the take up spool. To check that it is, slowly crank the film rewind crank clockwise. After a few turns the film should become tight in the canister, and you will feel the tension. If this happens then the film was loaded properly. If after quite a few turns you still feel nothing, then the film was not properly inserted into the take up spoll. If the film was not loaded correctly the film leader will go inside the canister as you crank. But that is not a problem. Any photo lab can pull the leader back out. Just make sure they know what happened.

Thanks.

Mar 12, 2011 | Cameras

1 Answer

When I turn the knob on the camera to be able to take another picture, the number still stays at zero. What's wrong with my camera?


There are a couple of possibilities that I can think of:

First, film must be loaded into the camera for the picture counter to increment.

Second, if you've loaded film, but the counter still does not change, it is possible the film is not advancing (the film release button/knob/lever that you use to rewind the film may be activated) or the film has slipped off the sprockets on the take-up spool.

If you can stand to lose the photos you may have already taken, just open the back of the camera and make sure the film is advancing when you take a photo.

If you can't possibly lose the photos, rewind the film and take the film to be developed. Try to find a local developer that only charges for the photos that "came out"... This can save a lot of money if only a few frames develop properly (or if none come out!)

Sep 01, 2010 | Pentax K1000 35mm SLR Camera

1 Answer

Rewind stuck on reverse


Hi Luce n Steve, To quote JC at Photo.Net: "sometimes the rewind function "gets stuck" if the camera thinks a previous rewind did not complete successfully. The solution is to reset it by forcing a rewind operation. Just press the two rewind buttons simultaneously: on the left side of the lens and just behind the shutter release. (They are marked and the manual explains how to force a rewind.) I did exactly this, and my next roll of film loaded without problems." Hope that help you folks.

Aug 22, 2010 | Nikon N75 35mm SLR Camera

1 Answer

Hi: I have a nikon n75 I have film in the camera but looking for the rewind button. Not able to locate my manual. First time doing this.


There is no rewind. When the camera loads the film, it pulls it out all the way. Each time it takes a shot, it rewinds the frame back into the can. At the end of the roll the leader is wound back into the can. As soon as you hear the motor stop, you can just open it and take out the film.

Oct 05, 2009 | Nikon N75 35mm SLR Camera

1 Answer

Can't advance film, press shutter, no result


Do you have film in the camera? If so, is it an old film or you have just loaded it?
If it's an old film, could it be at the end of the roll - to check this, 'lightly' turn the rewind lever backwards and forwards. As the camera is pointing away from you, turning the rewind knob clockwise will normally rewind the film (don't press the rewind button in, we don't actually want to rewind the film yet), turning the knob clockwise should be tight and a firm stop, if the film is at the end, you will feel the same tight firm stop if you turn it counter-clockwise. Don't turn the rewind knob backwards (counter-clockwise) too hard, you'll unscrew it and it may fall apart. If turning it backwards rolls freely in a full circle, then you have film left.
Another option is that, since it's been so long since you used it, the loading of the film may have gone amis and sometimes the cassette will flip backwards, jamming the film in place so it wont advance - if you have loaded the film and not taken any pics or have not been able to advance it at all, it should be safe to open the back as the film will be in it's original loading position, if you have left the film in it from some time and don't know what stage it's up to it may be best to take it to a camera store where they will have a "Black Bag" to put the camera in and manually open and unload the film. Make sure you get an experienced person - some pimply-face teen that's never used a film camera can easily put their fingers through the shutter while it's in the black bag - I've seen it plenty of times.
OK, that's enough to get started, did this work or do we need to try more options?

**.The best way to acknowledge contribution is to rate it's relevance.**

Feb 03, 2009 | Canon EOS-AE-1 35mm SLR Camera

1 Answer

Film advance lever and shutter release button are "stuck"


No, it is not the battery. My guess is that the film leader did not stay in the take-up spool and is now bunched up around it. Try rewinding the film carefully as you normally would but remember that you are only rewinding a small portion of the length. You can even just open the film door and start over. You will only loose 3 or 4 frames on the roll.

Apr 27, 2008 | Nikon FE 35mm SLR Camera

2 Answers

Nikon n75 problem loading film


I have (had) the same problem. I came onto this site to find out what I can do to fix it. It didn't help. I got pissed and almost threw the camera away. So I decided to get a little rough with the camera, (i normally wouldn't do this but i was going to throw it away).

I loaded the film like normal but before I closed the back I manually wound the film around the opposite spool. I guess I fooled the camera into thinking it had already wound the film.

When I closed the back of the camera everything worked fine.

I then snapped off the pics the camera said were left.

After this first role, I loaded the next role like normal. The camera worked like a charm!

By the way...the mirror dropped back down when I manually wound the film around the spool.

I hope this works...if it doesn't make any sense feel free to email me with any questions..

GOOD LUCK.
andy
amasseur at gmail dot com

Oct 03, 2007 | Nikon N75 35mm SLR Camera

2 Answers

N75 will not load film


Quick solution: force a manual rewind.
1. Remove film
2. Close camera back.
3. With the power turned on, press the two rewind buttons together. They are marked in red.
4. The camera will make a rewind sound and will stop after about 2 seconds.
5. DO NOT fire the shutter yet.
6. Put the mode on Manual and select a fast shutter speed like 1/90 sec. Any aperture will do.
7. Load the film correctly as given in the user's manual.
8. As you close the camera back, the film will prewind to the end of roll. At the end of the roll pre-wind the LCD will show you the total number of frames available.
9. Select any shooting mode.
10. Go on and take pictures.

Hope this helps

Dec 14, 2006 | Nikon N75 35mm SLR Camera

Not finding what you are looking for?
Nikon N75 with 28-105 lens 35mm Film Camera Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Photography Experts

pontelemon
pontelemon

Level 3 Expert

538 Answers

michael galang

Level 2 Expert

138 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Are you a Nikon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...