Question about JVC Arsenal KD-AR7000 CD Player

1 Answer


Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

Im sure you are aware but have you downloaded all the displays and updates? you need these for the graphics and displays to work properly. Really more info would help better solve this problem. Also try to reset it by pushing the pin in the front bottom right with a pin-pen or something with a tip. is a link you need pages 26-27 for downloading instructions.

Posted on Aug 21, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Pioneer keh p6025

You need an extra part to use the AUX function, part number CD-RB20 or CB-RD10. You then have to turn the function on in the settings:

1) Press FUNCTION to select AUX.
Press FUNCTION repeatedly until AUX appears
in the display.
2) Select AUX on or off with 5.
Pressing 5 will switch AUX between on and
off and that status will be displayed (e.g.,

Dec 18, 2013 | Pioneer Car Audio Receivers

2 Answers

Cannot get Aux to display after new battery installed in vehicle

This is easy, Press in and hold the function button and the volume dial,.. after the function menu comes up press function again to get to Aux off.. press up to get it to Aux 1 and then press in the volume dial again and youre set!

Jun 23, 2008 | Pioneer Premier DEH-P480MP CD Player

2 Answers

No display on sony cdx-m8800

if the remote makes it work and it plays ....if all functions work other than display check for bad solder joints on the display pay  attention to the ones on the corners if the unit is or was a tight fit in the dash its possible that the unit got a little stress and broke loose from the board .... if there is a white powder look in the display it probably bad... the silvery black in the corners is normal

Oct 28, 2007 | Sony CDX-M8800 CD Player

3 Answers

I have a pioneer DEH-P3000

Hi nhmteam. I have the solution for you: 1. With your DEH-P3000 turned off, press your FUNCtion button. It's a tiny button towards the upper right of the faceplate. Hold it down until you "ALARM OFF" or "ALARM ON" on the display. Release the button. 2. Press the FUNCtion button again and you should see another feature. I don't remember how many features you need to cycle through, but keep releasing and pressing the FUNCtion button until you see "M-CD ON" on the display. If you miss it just keep going and eventually it will come back. 3. On the right side of your faceplate there is a button with 4 arrows. You will need to push the up or down arrow until the display reads "M-CD OFF". If your display already reads "M-CD OFF", kip to the next step. 4. Press and release the FUNCtion button again and you should see "AUX OFF" on the display. Again press the up or down arrow until the display reads "AUX ON". 5. Now, turn on your unit, then press the INPUT button until the display reads "AUX". You are now ready to use your iPod in the way you always did. Keep these instructions for the future since I believe every time you disconnect the unit from the battery the unit will reset itself and disable your iPod cord. Best regards - TomR

Aug 30, 2007 | Pioneer DEH-P3000 CD Player

1 Answer

Main Display Window

Hello Gully, the flat cable between the front panel and the radio. If you want I can give you the part number but the replacement of this cable is not simple. Best regards, Arpi

Feb 27, 2007 | Sony CDX-M8800 CD Player

5 Answers

AUX inputs

Turn the ignition key to on or accessory position, turn the stereo off, then hold the function key for a couple seconds, the stereo will turn on and you scroll through the menu with the left and right arrow buttons and change settings with the up and down buttons

Feb 25, 2007 | Pioneer DEH-P6800MP CD Player

1 Answer

Display stopped working

My Alpine CDA-7842 works fine from a functional point of view but the display (readout) had stopped working. All the lights on the display work but the actual readout is blank. At first the readout would intermittently work now it's completely dead. Any assistance would be greatly appreciated.


Oct 26, 2006 | Alpine CDA-7842

1 Answer

Eclipse CD8445

make sure that the additional box is hooked up to the cable, or else the display will not function

Oct 16, 2006 | Eclipse CD8445 CD/MP3/WMA Receiver

Not finding what you are looking for?
JVC Arsenal KD-AR7000 CD Player Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio Receivers Experts


Level 3 Expert

94113 Answers

xxxxxx xxx

Level 3 Expert

4681 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides