Question about Maytag Neptune MAH9700 Front Load Washer
When washing a load the error code d5 comes up. It has been happening at any point during the whole cycle. d5 means door isn't locked. So I just open it and slam it back and then finish the load. Anything I should do for the lock so it will stop interrupting the cycle?
It sound like a loose or a broken lid switch issue. The lid switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washer to get to the switch. Good luck!
Posted on Aug 22, 2007
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 06, 2015 | Samsung Washing Machines
Jul 28, 2011 | Samsung WF337AA Front Load Washer
The reason for d5 error is due to defective door lock switch. It is a door lock error code, more than likely a bad door latch it's an easy repair. When washer displays this code it means door is open while washer is running. Check the lid switch and striker.
Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com
Feb 02, 2011 | Washing Machines
A d5 error code usually means Sd. This error code is displayed when the control detects the basket has not seated on the hub or that the pressure switch has detected a Suds-lock condition. The washer will try to run a mini-clean out cycle using cold water and a 5 minute pause to clear the suds. If this cycle does not clear the display and complete the cycle the clothing may need to be rinsed by hand and then rewashed. The fault is caused by using the wrong detergent or excessive amounts of detergent.
Note: If the Hard Reset does not work, there may be an internal failure with the washer.
Dec 11, 2010 | Kenmore HE2 Plus Front Load Washer
Oct 14, 2010 | Samsung WF337AA Front Load Washer
Jun 19, 2010 | Washing Machines
Apr 12, 2010 | Whirlpool Duet GHW9150P Front Load Washer
Mar 29, 2010 | Kenmore Elite 45986 Front Load Washer
Dec 25, 2009 | Maytag Neptune MAH5500B Front Load Washer
Sep 13, 2009 | Maytag Neptune MAH5500B Front Load Washer
3,212 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: