Question about Epson ACULASER CX11NF All-In-One Printer

3 Answers

Printing - White Specs on page

- There's a White Spec on Every Page when printing on my CX11N. Does anyone know how to clean this machine? I am unable to find my manual.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers
Re: Printing - White Specs on page

There is cleaning stick located on the right side of the printer, to access it you need to open the cover B pull out the gray lever located on the right then an opening on the right side of the printer where you can pull out the cleaning stick. If this doesn't resolved your issue reseat the toners. if same replace the pcu.

Posted on Oct 13, 2008

Re: Printing - White Specs on page - Epson ACULASER CX11NF All-In-One Printer Printers & Copiers

New Photoconductor solved my issue.

Posted on Dec 18, 2007

Re: Printing - White Specs on page

The manuals are available on Epson's site. Here's a link to the User's Guide: I verified that the manual includes how to clean the printer. If that doesn't resolve the problem, please let us know so we can troubleshoot further.

Posted on Aug 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Got a ir2225 canon copier printing some white lines, anyone know why?

quite possibly you might need to do a head clean or a re-alignment of your printer.

Dec 12, 2014 | Canon Printers & Copiers

1 Answer

Consistent dots down print

Try to print clean page ,
Print a cleaning page During the printing process, paper, toner, and dust particles can accumulate inside the printer and can cause print quality issues such as toner specks or spatter, smears, streaks, lines or repeating marks. Follow these steps to clean the printer's paper path.
  1. Load copier-grade paper (not bond, heavy, or rough paper).
  2. On the printer's control panel, touch the Menu button.
  3. Touch Configure Device .
  4. Touch Print Quality .
  5. Touch Process Cleaning Page .
A Cleaning message appears on the printer control panel display while the cleaning is taking place. The cleaning process takes a few minutes to complete. Do not turn the printer off until the cleaning process has finished. A page will be printed when the task is complete. Discard the page. You might need to repeat the cleaning process to thoroughly clean the printer. Print a few more pages to see if the problem is resolved.

Mar 20, 2013 | HP LaserJet 5550DN Printer

2 Answers

I have a new photoconductor unit in my epson CX11N aculaser printer and now it is printing anything in colour with a white stripe down the left hand side about 4cm in


Try taking out all toners and reinstall them. Turn on unit, without Photoconductor, wait till you get error install photoconductor. Insert photoconductor and try printing again.

Hope this helps

Mar 26, 2010 | Epson AcuLaser CX11N All-In-One Printer

1 Answer

Mp960 color prints ok but black and white not printing

When was the last time you printed in color? New ink printers are built so with a "use it or lose it" theme. The print heads are now built into the machines and are not generally replaceable. Yours luckily is, but I don't know how easily. The link below is to the replacement which costs $130 + shipping. Sometimes it can be just as worth it to buy a new machine, in this case I would probably prefer to repair the damaged machine as the new printer cartridges cost more and have less ink.

Feb 16, 2010 | Canon PIXMA MP960 Printer

1 Answer

Full colour page print has faded lines printed through the work

I have ordered a new photocunductor unit as i am assuming that the other one was faulty.

Jul 07, 2008 | Epson AcuLaser CX11N All-In-One Printer

1 Answer

Officejet 7310 misses lines while printing, copying, etc

Turn off the unit.
Disconnect the Power Cable.
Open the rear access door.
Clean the rubber rollers with soft dampened clean clothes.
Let it dry for sometime.
Turn on the unit and see if it works.
If it doesn't work, your printer might have to be service.

Apr 10, 2008 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

Printer stopped printing fast

I don't think that the Technician did anything as these machines print at a set speed programmed into the system firmware best way to check is print out a demo page or a configuration sheet and I believe that this machine is unto 35 pages a minute in black and white. Send a one page print job to it at a copy rate of 35 and time it, it should only take 1 minute from when the first page exits the machine. If it is longer by more than 10 seconds check that the driver is not set for color mode as then the machine is using all four colors to make black making it seem slower as longer process.

Hope this helps
Thanks J

Dec 18, 2007 | HP Color LaserJet 3500 Printer

Not finding what you are looking for?
Epson ACULASER CX11NF All-In-One Printer Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

18259 Answers

Cindy Wells

Level 3 Expert

4722 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides