Question about Sony KP-43T70 43" Rear Projection Television

3 Answers

Picture looks 3d

I had this Tv for 7 years and the picture looks 3d and hard to watch this just started happening about 3 weeks ago

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers
Re: picture looks 3d

This is exactly the same issue that I have with mine and it costs $200 to fix it according to the tech that came to my house- however he said "if you can find the parts"!!

Posted on Mar 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: picture looks 3d

I have the same set and am getting the same issue. Were you able to fix? Shoot me an e-mail at to let me know. Thanks.

Posted on Jan 23, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers
Re: picture looks 3d

It is hard to see, but it looks like your red color has shifted to the right. In most projection sets there are 2 large convergence IC's which put the 3 colors exactly where they are supposed to be on the screen. When one color is way off, giving the 3D effect, and you are unable to line the colors up using the convergence menu, it means that one of the convergence IC's has burned out. This is one of the most common failures in standard projection sets. The burned out IC should be replaced and the convergence circuits realigned by a qualified tech familiar with projection sets.

Posted on Aug 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

HLR 5067W 6yrs old. I replaced the lamp and color wheel about 3 years ago. Last week the TV would not turn on. Fans run hard, no light from the lamp. Tries for 3 cycles, then shuts down and front...

Tv is on every day and watches 4 to 5 hours every day?Yes,3 years now the projection lamp require replacement again and the board that call the Ballast board might require replacement too,this Ballast board only job is it to ignite the projection lamp only..

Jun 04, 2011 | Samsung HLR5067WX 50" Rear Projection HDTV

1 Answer

It seems that I am watching my TV in 3D.

im joel a simple electroncis tech. try to adjust the settings but it does'nt work the i think 3 color inside ( red,blue,green) is one or two of them is the best solution try to go the expert tech nothing else

Apr 12, 2010 | RCA P52926 52" Rear Projection Television

1 Answer

GE 52 " rearprojection flat screen picture bowing 3d effect

Thats usually a very easy repair by replacing FL231, DL231 and CL230 total parts are about 11.00 at the following link and they provide free instructions. The components are all listed under RCA parts category.

May 16, 2009 | GE D52GW12 52" Rear Projection HDTV-Ready...

1 Answer

RCA Projection TV Model HD61W66

convergence power supply not working , there is a mini fuse close to the flyback thansformer , 400miliamp at 250 v resolder the flyback and replace this fuse , there is 3 fuses it look like small squer brown color is the one on the middle , normal repair $200 - 300

May 07, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...

2 Answers

Hitachi 43FDX Rear Projection TV

If the picture was good prior to the 3D images, I would fix it. The convergence ICs either have poor connections or are defective. The IC is an STK392-110. There may be 2 inside the set. If you have this repaired, expect a labor cost in the $200 range. Request that the ICs be replaced rather than the board changed. This will maintain all of the internal settings and require only part replacement not a complete re-convergence adjustment.

Keep us posted.


May 01, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

RCA R52WH74 Picture is sagging, looks 3d, and double picture

Go to menu then setup look for convergence if you do not see convergence then you have A open FUSE It will be on right side of FBT flyback transfomer there is 3 of them in a roll they are small brown rectrangler looking caps but ARE FUSES it will be the one in the middle. Replace it and you have a FIXYA.

Feb 19, 2009 | RCA R52WH73 Projection Television

1 Answer

Philips Rear Projection TV 43PP9202 Picture looks 3D

You need to replace both convergence ICs they are STK392-120 you will also need about four 6.8 ohm 1 watt resistors. You can get replacement ICs and resistors at the following link and they provide free instalation instructions with pictures. here is the link.

Jul 20, 2008 | Philips 43PP9202 43" Rear Projection...

1 Answer


Do you happen to have a cable box? (reset cable box also by unpluging it). is that line also showing on dvd player on different input?

Jul 01, 2008 | Toshiba 50HM67 50" HDTV

1 Answer

TV picture shaking!!!

It sounds like the Hyper board is begining to fail....Does the menu shake too?

May 16, 2007 | Toshiba 50HX70 50" Rear Projection...

Not finding what you are looking for?
Sony KP-43T70 43" Rear Projection Television Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers


Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides