Question about Teac (HD10U8/KIT) (HD10U8KIT) 8 GB Hard Drive

1 Answer

I dont find it

When i insert it in the USB drive the computer gives me the recognising sound but after some also i cant find it in the my computer,,,,i have lots of data stored in this drive please help

Posted by on

  • rrh1975 Dec 27, 2007

    I have the same problem. The system first indicated the driver was properly installed, then it stopped working... it happened both at my desktop at home and at the office.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 254 Answers

First, have you tried it in another computer? Take a look here, problems with other external hard disk drives are explained- unfortunately they don't suggest any easy fixes. http://www.dataclinic.co.uk/data-recover... These external drives, according to this site, and my own limited experience, are merely a standard drive in a housing with the proper adaptive circuitry for USB/Firewire connection. It looks like your unit uses a drive more like what would be found in a laptop, where others use what is used in a standard desktop computer. One possibility: open the housing, check the connections to the drive. I've seen one drive where the IDE interface cable wasn't seated properly. If what the above link explains is the problem with your drive, a simple solution looks bleak. You could try some of the diagnostic software available on the 'net. I'm sorry no easy fixes are provided.

Posted on Aug 21, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HPv165w recognized in Device manager...But cant open it in My computer..


Try inserting the pen drive into another computer to see if you can open the data on this pen drive.
If not you may need to format the pen drive.

Nov 24, 2012 | Electronics - Others

1 Answer

Transcend 16 gb pendrive is not recognised


Right-click on COMPUTER. Select PROPERTIES, Go to DEVICE MANAGER. Under UNIVERSAL SERIAL BUS CONTROLLERS, check all the USB ports to see if they are working properly. If the USB PORT in which you have inserted your pen-drive, is showing an error, right-click over it and select PROPERTIES and make a TROUBLESHOOT.

If this troubleshooting doesn't help you, use another computer to check if your Pen-drive is working there. If the problem persists, go to the manufacturer's service center and ask for a replacement or repair.

Hope this helps, Mrityunjay.

Jun 25, 2012 | Electronics - Others

1 Answer

I put my sd card and adapter in the computer and nothing pops up and i dont know how to get to it and i cant add stuff on it.


First make sure you inserted the SD correctly, some slots require you to insert upside down. Look in my computer, and see if you see an indication USB drive or Removable drive.

Dec 23, 2010 | SanDisk 2GB microSD Memory Card

1 Answer

My pc wont recognise my printer usb connection


Go to the device manager ... uninstall all the USB entries. Disconnect your printer. Reboot your computer. Reinstall your printer according to the manufacturer instructions (normally, insert the CD and follow the prompts. If you dont have the CD, get the driver from the manufacturer web site. You dont list the manufacturer so I cannot give you a link).

Thanks for your interest in FixYa.com

Sep 22, 2010 | Office Equipment & Supplies

1 Answer

My trancend 8gb pendrive when inserted dont show name of transend


Dont worry much about that, it's the way your PC recognises the device. you can rename the drive if you want in my computer

May 06, 2010 | Transcend (589307) Media

3 Answers

Skymedi USB drive is not recognised on my computer


i have usb kingston 4 GB data mini traveler, and my problem usb detect skymidi usb drive i dont know skymedi. i don't want if have format,because there are many data which is of important.
how is it's solution.


thanks 4 all

by blurz

Feb 20, 2009 | Kingston Technologies 512MB DataTraveler I...

1 Answer

Computer does not recognise Sandisk


They have a good return policy on them. They should be able to get you a new one right away.

Jan 17, 2009 | SanDisk 2GB microSD Memory Card

1 Answer

Usb not recognised


the connector of you usb port of your unit kinston is need to re_soldering by using a soldering iron.or need to re-heat by hot-air unit.


kira_ryuk@yahoo.com

Jan 11, 2009 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Computers & Internet Experts

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1031 Answers

k24674

Level 3 Expert

8073 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Teac Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...