IP4200 will not print pictures

Change the black ink cartridge

if its not printing just test the test page printing.If even u didnt get the test page check whether u get the correct drivers for ur printer. Then chek the toner for powder and check wheter the toner is defectd


Get the exact drivers here for ur printer: software.canon-europe.com

This is a Resume button. Just pressing it should get you going again.

Either the ink you are using is not going to give the color you want, or you have print heads that are blocked.

Do a nozzle check and also black may be MT

Your black ink seems to have spilled a bit at the nozzle. The fact is even if you do nothing it should seize staining the back of the paper after a while, so long as the spill is only temporal. But if you want it over with quickly, you may try printing quite good number of pages till you see that the stops. With every print you will most certainly observe that the stain will reduce. Otherwise if you can reach into the printer with a stick or something, you may try to clean it.

Try removing all ink bins except black then you won't have any problems. You should also be able to go into your printer settings and select "Black and White" or "No Color" and it will print ok. Removing the ink trays is the easiest way though.

This error is the print head is not installed
[1401], or it is not properly
installed (Print head temperature
sensor error [1403] / Faulty
EEPROM data of the print head
[1405]).

rtfgh

1) Under printer options make sure that greyscale is NOT selected. I.E. Color Printing.

2) Make sure page layout is set to 1 (Not 2 per page)

Check margins of page are set to minimum size.