Question about Proton MM2701VT 27" TV

1 Answer

Need vertical video in my vertical Plasma through a panasonic industrial camera

Dear sir, How can i convert a video camera picture in vertical orientaion or portrait manner, I am live shooting a video but my plasma screens are vertical. Thanks in Advance

Posted by on

1 Answer

Re: Need vertical video in my vertical Plasma through a panasonic industrial camera - Proton MM2701VT 27" TV Standard (CRT)...

Use QT pro to rotate it!

Posted on Feb 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Laptop to TV rolling screen

Difference in vertical frequency between TV and converter.Adjust colour settings PAL or NTSC on both TV and set top box.

Apr 08, 2014 | Standard (CRT) Televisions

1 Answer

Panasonic ctp2780sf no picture faint line going vertical across screen

There are two reasons for this fault. A fault smoothing capacitor at the video output voltage rail, or excess of screen voltage. These lines are called 'vertical retrace lines' technically. Check this link for more details. It has a post, which have information regarding this fault. Go to older posts there.

Dec 25, 2012 | Panasonic Standard (CRT) Televisions

1 Answer

Horizontal lines across TV screen Pansonic CT 35g25

Check its vertical output section circuit for any component damage or loose soldering terminals. Check the solder terminals of the vertical output IC. Resolder all the suspected solder terminals by applying al little more fresh solder, without making any solder bridge short in between adjacent solder terminals.
If this do not help you, replace the vertical output IC. Lose of Vertical Scan is the problem of your TV.

Aug 04, 2012 | Panasonic CT-35G25 TV

1 Answer

I have a Panasonic TV CT-34WX50 every time I change channels

it sounds that have problem in the chroma board ( video board ) a small board that hooked up in the neck of the picture tube. if the color is greenish the cause is dead in red video driver transistor or open resistance. hope this can help good luck.

Jul 26, 2012 | Panasonic CT-34WX50 34" TV

1 Answer

Trying to connect my inspiron 15 to my toshiba 32af44 and i can't get a picture on my tv. I have bought a pig tail that goes from VGA(the lap top side) to s-video/audio-video cables(tv side) but still...

> I have bought a pig tail that goes from VGA(the lap top side) to s-video/audio-video cables(tv side)
A simple pigtail won't convert VGA to S-video. The VGA output consists of separate RGB lines and horizontal and vertical synchronization lines.
If you have an adapter that really converts VGA (this output has no audio path) to S-Video and audio lines, then you probably just need to re-select the input through the TV's menu system.

Nov 21, 2010 | Toshiba 32AF44 32" TV

2 Answers

Panasonic 27'' tube television

There are some components in the vertical deflection circuit area that are failing. An experienced TV service man should be able to troubleshoot and repair this for you. It could take several hours of labour cost.

Jerry G.

Apr 26, 2009 | Panasonic CT-36D12D 36" TV

1 Answer

No picture no sound nothing

We had a TV repairman look at our 3 year old (Oct 2004) Panasonic CT-32HXC14J FLAT SCREEN TV. It suddenly stopped working and appeared to have no power getting to it. It was a high voltage supply or transformer that was bad and has to be replaced - estimated cost is around $400. In a year we will also need to spend around $125 for a digital converter box. We went for the repair since that is still cheaper than a $1,000 plus equivalent size LCD or plasma.

Our old tube tv was still working after 15+ years. They aren't making them like they used to. Way to go Panasonic.

Nov 09, 2007 | Panasonic CT-32HXC14 32" TV

1 Answer

Panasonic TV - no picture, but sound is ok



it is due to vertical section failure.

  • before you start any work reduce brightness to avoid crt burn.
  • please check some loose contact or loose connector.
  • check supply to vertical section
  • check parts in vertical output section
  • check vertical ic.
  • hope this will help.
  • good luck.

Oct 17, 2007 | Standard (CRT) Televisions

1 Answer

Panasonic CT-32hX41 vertical picture problem (hourglass)

this product has a pincushion problem and requires servicing but unfortunatley it is what we call in the business NECO

Dec 05, 2006 | Panasonic CT-27HL14 27" TV

Not finding what you are looking for?
Proton MM2701VT 27" TV Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proton Standard (CRT) Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

isaac johny
isaac johny

Level 3 Expert

796 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Proton Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides