Jandy pda time keeps resetting back to default and the spa blower will turn on and off by itself

go into system setup then find time and date reset to correct if every time the power goes out it is wrong you need to replace the battery backup either a 9 volt or a nicad on back of PCB board

turn whole system off then turn aqualink back on then PDA

shut off everything then turn the aqualink back on then turn PDA back on

How about the battery in the controller box? The 9v battery keeps the settings in its memory - not the PDA.

I had a problem simmular to yours When I changed my remote I had to also change my antena. Also make sure youd dip switch settings are set the same. between the antena & remote. The only reset that I know of is in the remot. Go to Menu then System Set UP. Then clear Memory. You Will loose all programs like, Dimming relays temp settings times for off & on. etc. I think if you have a intella flo motor you will have to reset it also.

System locked up. Handheld is frozen at WAITING screen. Microprocessor is locked.

Here is what you do:

1. Turn off power to the system.

2. Disconnect battery at the Power Center and turn on power.

3. Reconnect the battery and reset time and date.

4. Thank me.... You are welcome... BadWally sends.