Lost user name and password for configuration manager

well....you entering the WRONG IP address.....


from your manual :


3 Configuring this Wireless-G Router
In this chapter, it describes how to use the web management tool, a web browser-based utility that
allows you to remotely configure and manage this Wireless-G Router.
Open your Web browser and type the IP address "http://192.168.1.254" and press <ENTER>.
Enter the User name and Password when prompted, the default User name is "root", and the
default Password is "1234".

Tallon41

Router's password could mean 2 things. First password for you to open router's configuration page or password for you to connect wireless to your router.

Configuration's password:
-Logon to your router configuration page
-Please to the TOOLS and ADMIN Tab. You there you can change the admin user name and password. If you do not have the user name and password, please check for the default user name and password on the router's manual. If default user name and password won't work reset the router. Press and hold down the reset button or pinhole on the back of the router for 10 seconds. Then re-enter user name and password again. It should work this time.

Wireless Security Password:

-Logon to your router configuration page
-Under SETUP and Wireless Settings tab you will get an option to change the wireless password

Try this:
To access the Zoom Configuration Manager (web-based configuration utility) on the Zoom DSL modem:

1. Close any open programs including antivirus and pop-up blockers.
2. Open a web browser, and in its address bar, type http://10.0.0.2 (or http://192.168.0.1 for Zoom ADSL X6v users) and then press Enter (or Return).
3. In the Enter Network Password dialog box, type the following username and password in lowercase then click OK. (Note: The modem User Name and Password you enter here are NOT the same as the User Name and Password that your Internet service provider may have given you.)
   • User Name: admin
   • Password: zoomadsl (where "l" is a lowercase letter L)

If you are not prompted for a User Name and Password, click here for more information.

For reset router press RESET button for 10 seconds it is in back side of router.Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless then wireless security then WEP security change the password and save settings.Then restart router then you can connect wifi with new password. Let me know if you need further assistance. Thanks for using FixYa.

yes you can use it with it.Just you need to configure your router as your french telephone ADSL settings.
You need to configure your router.
For that Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Click on wireless settings enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.
Let me know if you need further assistance.
Thanks for using FixYa.

Access the Zoom Configuration Manager:

• From a computer that is connected to the Zoom X6, open a web browser and type http://10.0.0.2 in the address line and then press Enter (or Return).
• Enter the User Name and Password (in lowercvase letters):
  • User Name: admin
  • Pasword: zoomadsl (where "l" is a lowercase letter L)

If you forgot your password, you must reset your modem.

Note: This process will change all your settings back to the factory defaults.

To reset the modem:

Step 1 Locate the Reset button on the rear panel of the unit.



Step 2 With the modem powered on, use a paperclip to hold the button down for 10 seconds.

Step 3 Release the button and the modem will go through its reboot process.

Step 4 Wait about 30 seconds to access the modem.

After restart the modem you can use default username and password (admin/admin)

For further help you can check the link below

ftp://ftp.dlink.com/Broadband/dsl2640B/Manual/dsl2640B_Manual_100.zip

To access the Zoom Configuration Manager (web-based configuration utility)

1. Close any open programs including antivirus and pop-up blockers.
2. Open a web browser, and in its address bar, type http://10.0.0.2 (or http://192.168.0.1 for Zoom ADSL X6v users) and then press Enter (or Return).
3. In the Enter Network Password dialog box, type the following username and password in lowercase then click OK. (Note: The modem User Name and Password you enter here are NOT the same as the User Name and Password that your Internet service provider may have given you.)
   • User Name: admin
   • Password: zoomadsl (where "l" is a lowercase letter L)

i think it will be 10.0.0.2, not 10.0.0.02

the user name admin
password epicrouter