Hi. my moto a1000 has the problem of not charging and i know theres a connection as when i do go to charge it and turn it on it flickers for a second and just dies. I have been to some phone shops and the battery doesnt seem to be the problem. i would appreciate if anyone could help
Hey addysam test your charger this way, turn the light off and then insert the charger, there should be a flicker but very dim, if this occurs you will probably need a new pcb or you may have a corroded port.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try holding down the power key for 30 seconds. You should see a white indicator light blink. If not then plug it into a charger that you know works. If your not using the original charger it may not be getting enough power. You may need to charge it for a couple of hours and then attempt to turn it on while on the charger by holding down the power button for atleast 30 secs or untill it turns on.
I believe I answered your question on this thread: Why wont my motorola phone wont come on
Please follow the steps I shared with you there and if that does not get your phone to turn on. Please contact our Technicians from phone support team at this line: 1-800-734-5870 on this hours Mon-Fri 7AM-10PM; Sat-Sun 9AM-6PM CST.
If you plug the charger into your phone and the battery icon does not change, then it means your physical connection is loose. If the battery connection does change but will not hold charge, then the battery is dead. I have managed 20 Q's in our office. Most of the time we just buy new batteries. Sometimes I fixed the connection by doing the following:
Use a needle nose plier and squueze the mini usb tip on the chargerslightly...very slightly. This will give it a "tighter" fit when you plug it into your phone. Make sure it's unplugged from the wall when you are doing this =).