I have a Minolta maxxum 5D camera I want to know if there is something that i can purchase to have the flash unit Sunpak Model 522 to work properly with the Minolta camera that I have.
SOURCE: Minolta Maxxum 3200i Flash does work
Try to short out the flash and see if the flash flashes.
Remove flash from camera.
New or fresh bateries installed.
Get wire with insulation and remove both end bare to 1/4"
Turn on flash and wait until light turn green or ready.
Touch one lead to center of flash pin, touch other end to the outside(rail on the side) pin.
Flash should discharges.
[email protected]
101 views
Usually answered in minutes!
×